55.2-59 Shifter collar - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billronalds54 · 07-27-2020, 01:30 PM

Where can I get a new shifter collar for 69 Chev Pickup tilt column?
The hole at the bottom is worn and the shifter is sloppy

sack54 · 07-27-2020, 01:42 PM

Quote:

Originally Posted by billronalds54

Where can I get a new shifter collar for 69 Chev Pickup tilt column?
The hole at the bottom is worn and the shifter is sloppy

If you don't find one. Try: drill it out and install a bushing to bring back to spec.
There is plenty of pre- made bushings around, OR you can just make your own .

billronalds54 · 07-27-2020, 01:58 PM

What kind of bushing?
How do I hold it in as the worn side is on the bottom.

**mr48chev** · 07-27-2020, 02:39 PM

Some good hardware stores have small metal bushings in the little pull out bins. I'm not sure if you have Ace up there but they usually have them in the little pull out drawers above the bolt bins if you hunt. You need to know the ID and probably take the pin as your sample.

billronalds54 · 07-27-2020, 02:45 PM

Thanks - I'll see if I can find something but our hardware stores aren't as good as yours. Should I locktite it in?

sack54 · 07-27-2020, 06:50 PM

Quote:

Originally Posted by billronalds54

Thanks - I'll see if I can find something but our hardware stores aren't as good as yours. Should I locktite it in?

JB weld will work to fill in any voids that are left ,and also hold in the bushing

07-27-2020, 01:30 PM	#1
billronalds54 Registered User Join Date: Aug 2017 Location: Langley BC Posts: 5	Shifter collar Where can I get a new shifter collar for 69 Chev Pickup tilt column? The hole at the bottom is worn and the shifter is sloppy

07-27-2020, 01:58 PM	#3
billronalds54 Registered User Join Date: Aug 2017 Location: Langley BC Posts: 5	Re: Shifter collar What kind of bushing? How do I hold it in as the worn side is on the bottom.

07-27-2020, 02:39 PM	#4
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,715	Re: Shifter collar Some good hardware stores have small metal bushings in the little pull out bins. I'm not sure if you have Ace up there but they usually have them in the little pull out drawers above the bolt bins if you hunt. You need to know the ID and probably take the pin as your sample. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

07-27-2020, 02:45 PM	#5
billronalds54 Registered User Join Date: Aug 2017 Location: Langley BC Posts: 5	Re: Shifter collar Thanks - I'll see if I can find something but our hardware stores aren't as good as yours. Should I locktite it in?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.