The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-28-2020, 11:39 AM   #1
lowrodderchev
Registered User
 
lowrodderchev's Avatar
 
Join Date: Dec 2011
Location: visalia ca
Posts: 1,480
Cut harness

I picked up a LS motor teams for a swap on my 68 burban but the wiring harness that goes into the firewall was cut am I still able to use it?
__________________
my 57 chevy truck build
http://67-72chevytrucks.com/vboard/s...d.php?t=601554
lowrodderchev is offline   Reply With Quote
Old 07-28-2020, 12:14 PM   #2
87chevy.com
BMW & ASE Master Certified
 
87chevy.com's Avatar
 
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,266
Re: Cut harness

Quote:
Originally Posted by lowrodderchev View Post
I picked up a LS motor teams for a swap on my 68 burban but the wiring harness that goes into the firewall was cut am I still able to use it?
Take a picture, what year did the motor come out of?

More specifics will get you more advice
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit

New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD

A poor man buy's it twice

finally got my domain name back, 87chevy.com.... site rework in progress
87chevy.com is offline   Reply With Quote
Old 07-28-2020, 12:19 PM   #3
lowrodderchev
Registered User
 
lowrodderchev's Avatar
 
Join Date: Dec 2011
Location: visalia ca
Posts: 1,480
Re: Cut harness

2000 chevy truck my phone won't let me attach pix for some reason harness was cut on right side of steering in engine compartment
__________________
my 57 chevy truck build
http://67-72chevytrucks.com/vboard/s...d.php?t=601554
lowrodderchev is offline   Reply With Quote
Old 07-29-2020, 09:12 PM   #4
Dustytrix
Registered User
 
Join Date: Jan 2012
Location: Petal,Ms.
Posts: 428
Re: Cut harness

It still depends on which wires were cut. The ecm is located where you are describing. If they are a lot of pinks that are cut there you ok. Really need to trace wires from each sensor connector back to ecm, if they are intact you are good. The rest are usually spliced to make a standalone anyway.
Dustytrix is offline   Reply With Quote
Old 07-30-2020, 04:56 PM   #5
aknovaman
Registered User
 
Join Date: Aug 2013
Location: Tecumseh
Posts: 355
Re: Cut harness

The only LS truck EFI harness that goes through the firewall is from the TACC module (if applicable). All the EFi wires are attached to the bottom of the fuse panel and a few other connectors that connect to the under hood chassis. Can you post pics?
__________________
Current project 1959 Willys = GEZR TRUK
Geezer is a Latin compound word made up of two roots.
Gee meaning Urine Stain and Zer meaning your pants are open!
FMCDH GBU and GBA
http://www.youtube.com/user/aknovaman/videos
aknovaman is offline   Reply With Quote
Old 07-30-2020, 09:06 PM   #6
87chevy.com
BMW & ASE Master Certified
 
87chevy.com's Avatar
 
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,266
Re: Cut harness

Try fixing the phone and photo problem, so again, you get the best recommendation
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit

New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD

A poor man buy's it twice

finally got my domain name back, 87chevy.com.... site rework in progress
87chevy.com is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:11 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com