PA WTB: Saginaw 3 speed shift arms and rods

[bhap]

I am installing a Saginaw 3 speed into my 62 C10 and need at least the shift arms at the transmission and if it makes life easier, the shift rods from a V8. I have read that the Muncie rods can be lengthened and bent to fit, but if 67-68 rods will work that would be easier. Let me know if you have a couple of arms and or the rods.

Thanks for your help - shipping would be to Pittsburgh, PA 15228

[jimmy70]

I have the 3spd shift rod from column to transmission. PM me number and I can send a few pix. marko

[jimmy70]

Sent u pix / let me know.

[bhap]

I think that you have one shift rod and the straight one is a clutch rod - maybe somebody can confirm? I'd like to find a matched set of shift rods - thanks

[1rippen6]

I have some 3 spd rods but I think they are 4x4 v8, I think I have them listed. I will try and find and move the post to the top

[special-K]

I believe I have these shift rods. It's been a while since I looked at my stash. I have a 3spd shift rod ID thread in the 67-72 board you might want to search up to compare what is offered to you. I believe we got them all identified and those shows are from my collection. I just noticed a sketch of each I put on a small tablet I made from those pictures when I went out to compare ID them.