|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-11-2020, 03:41 PM
|
#1 |
|
Registered User
Join Date: May 2016
Location: Orange Park, FL
Posts: 191
|
Need help with glass and a gauge part
I'm getting glass for my cab cut by a friend of mine who has a glass shop locally. Have all original pieces for templates except for the back glass. I have 2/3 of a piece. Balance of it disintegrated when removed years ago. Can anyone give me the width (left to right) of the back glass at it's widest point? This is for a '51 if it makes a difference.
Also, I'm modifying my stock speedo by substituting a electronic Speed Hut unit for the original. I'm hoping someone has an old cluster gauge mask they can part with the center piece circled in red in the pic. Condition of rest of the mask is unimportant as long as that center piece, especially the chrome ring, is in good shape. Can't use the similar piece from the speedo as that has a hole for the odometer. Don't know if masks are different throughout the years. Again, this is for a '51. Thanks in advance for any help.
__________________
Al '51 3600, LS5.3, 4L60e, Danforth cross., Blazer front susp., Borg Warner 9 bolt 3.27 GR, Wrangler leafs |
|
|
|
08-11-2020, 05:32 PM
|
#2 |
|
Registered User
Join Date: Dec 2018
Location: Farmington NM
Posts: 112
|
Re: Need help with glass and a gauge part
will this work ?
|
|
|
|
|
08-11-2020, 06:23 PM
|
#3 |
|
Registered User
Join Date: May 2016
Location: Orange Park, FL
Posts: 191
|
Re: Need help with glass and a gauge part
Thanks Bimus! From here looks like it would work as long as those to marks I circled are just scratches in the paint and not dings. Even if they are and aren't too big I can probably flatten them. How much you want for it?
__________________
Al '51 3600, LS5.3, 4L60e, Danforth cross., Blazer front susp., Borg Warner 9 bolt 3.27 GR, Wrangler leafs |
|
|
|
|
08-11-2020, 11:43 PM
|
#6 |
|
Registered User
Join Date: May 2016
Location: Orange Park, FL
Posts: 191
|
Re: Need help with glass and a gauge part
Thanks NorCalGal, exactly what I needed to know & thanks for the pic too. Very helpful. Hope I can repay the favor one day.
__________________
Al '51 3600, LS5.3, 4L60e, Danforth cross., Blazer front susp., Borg Warner 9 bolt 3.27 GR, Wrangler leafs |
|
|
|
|
08-12-2020, 01:27 PM
|
#7 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,705
|
Re: Need help with glass and a gauge part
If you are up to waiting for the mail to get there from here I can trace one I have on a sheet of paper and send it to you. I did it for someone else a few years ago.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
08-12-2020, 06:09 PM
|
#8 | |
|
Registered User
Join Date: May 2016
Location: Orange Park, FL
Posts: 191
|
Re: Need help with glass and a gauge part
Quote:
__________________
Al '51 3600, LS5.3, 4L60e, Danforth cross., Blazer front susp., Borg Warner 9 bolt 3.27 GR, Wrangler leafs |
|
|
|
|
|
08-12-2020, 11:09 PM
|
#9 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,705
|
Re: Need help with glass and a gauge part
If you have most of it her measurements should get the job done as they can flip the glass to make the pattern.
PM me your mailing address if you decide you can use it.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
