GA WTB--License plate light "hold down" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

roll_the_dice · 08-17-2020, 02:35 PM

I am looking for the piece that holds down the glass for the license plate light. I have not seen it reproduced, but if you have one or know of a repop that would be fine as well. PM me or post here if you have one. Thanks

**The Rocknrod** · 08-18-2020, 12:29 PM

That's a tough one. Just in case you need it though - https://www.cjponyparts.com/rear-lic...-1966/p/LPB58/
Goodmark makes the whole thing - https://www.goodmarkindustries.com/c...42-885-60.aspx or https://www.classicindustries.com/pr...s/ct26699.html
Just a bear.
Have you called Aspen in Arizona?

roll_the_dice · 08-18-2020, 12:36 PM

Yeah, I knew it would be a needle in a haystack. I got overzealous with mine in the blaster (oops). I can probably use it, but ...

Good idea on Aspen..I always forget about them. I have the repop in my cart from LMC since I am ordering some other parts from them, but wanted to try and find an original one first. Thanks!

roll_the_dice · 08-18-2020, 03:00 PM

I ordered an entire new license plate bracket since I was ordering some parts anyway...If someone has the part I need, I would still be interested. Otherwise, I will let this drop and won't bump it. Thanks

**DPowers** · 08-18-2020, 05:05 PM

might have a powder coated one. Pulling some other parts later this evening so will check.

roll_the_dice · 08-18-2020, 05:06 PM

That would be awesome Dwane...thanks for checking!

**DPowers** · 08-18-2020, 08:17 PM

Quote:

Originally Posted by roll_the_dice

That would be awesome Dwane...thanks for checking!

What I got.

roll_the_dice · 08-18-2020, 08:28 PM

PM Sent

1960chevypanel · 08-18-2020, 10:33 PM

Quote:

Originally Posted by roll_the_dice

I ordered an entire new license plate bracket since I was ordering some parts anyway...

I could use the old one if it's in good shape

roll_the_dice · 08-18-2020, 10:40 PM

Quote:

Originally Posted by 1960chevypanel

I could use the old one if it's in good shape

I bought a new one and the piece from DPowers. I am going to decide when I get both which I am going to use. My original is in good shape except for the one piece. I do have it, but it has some small holes in it.

If I decide to keep the new one, I will contact you for the OEM. Probably be about a week before I have the new one.

08-17-2020, 02:35 PM	#1
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	WTB--License plate light "hold down" I am looking for the piece that holds down the glass for the license plate light. I have not seen it reproduced, but if you have one or know of a repop that would be fine as well. PM me or post here if you have one. Thanks Attached Images __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

08-18-2020, 12:29 PM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: WTB--License plate light "hold down" That's a tough one. Just in case you need it though - https://www.cjponyparts.com/rear-lic...-1966/p/LPB58/ Goodmark makes the whole thing - https://www.goodmarkindustries.com/c...42-885-60.aspx or https://www.classicindustries.com/pr...s/ct26699.html Just a bear. Have you called Aspen in Arizona? __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

08-18-2020, 12:36 PM	#3
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: WTB--License plate light "hold down" Yeah, I knew it would be a needle in a haystack. I got overzealous with mine in the blaster (oops). I can probably use it, but ... Good idea on Aspen..I always forget about them. I have the repop in my cart from LMC since I am ordering some other parts from them, but wanted to try and find an original one first. Thanks! __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

08-18-2020, 03:00 PM	#4
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: WTB--License plate light "hold down" I ordered an entire new license plate bracket since I was ordering some parts anyway...If someone has the part I need, I would still be interested. Otherwise, I will let this drop and won't bump it. Thanks __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck Last edited by roll_the_dice; 08-18-2020 at 05:06 PM.

08-18-2020, 05:05 PM	#5
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: WTB--License plate light "hold down" might have a powder coated one. Pulling some other parts later this evening so will check. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

08-18-2020, 05:06 PM	#6
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: WTB--License plate light "hold down" That would be awesome Dwane...thanks for checking! __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

08-18-2020, 08:28 PM	#8
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: WTB--License plate light "hold down" PM Sent __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.