'74 C10 Intercooler options - The 1947 - Present Chevrolet & GMC Truck Message Board Network

epfatboy · 09-04-2020, 08:55 AM

I just made a few dyno runs and we believe the numbers are coming up short due to the intercooler size. Right now I have my IC mounted under the radiator between the frame rails. This limits the size of the intercooler due to width and depth. Below is a shot of where the IC is mounted.
https://photos.app.goo.gl/8PHrxRCgppeBpyCC6

I have a much larger IC and have already cut the frame rails back so it could fit but I worry about the depth.

With that does anyone out there have some recommendations on IC's which fit into this space?

NOTE:
I'd move it up in front of the radiator but there is no room as I have my tranny cooler there and a AC condenser.

09-04-2020, 08:55 AM	#1
epfatboy Registered User Join Date: Mar 2018 Location: Barrington nh Posts: 114	'74 C10 Intercooler options I just made a few dyno runs and we believe the numbers are coming up short due to the intercooler size. Right now I have my IC mounted under the radiator between the frame rails. This limits the size of the intercooler due to width and depth. Below is a shot of where the IC is mounted. https://photos.app.goo.gl/8PHrxRCgppeBpyCC6 I have a much larger IC and have already cut the frame rails back so it could fit but I worry about the depth. With that does anyone out there have some recommendations on IC's which fit into this space? NOTE: I'd move it up in front of the radiator but there is no room as I have my tranny cooler there and a AC condenser.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.