Pics for flashed, shawno72 & rpmgroup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Classic Bowties** · 01-23-2012, 08:23 AM

Here are the two optional P13 fleetside in bed spare tire mounting brackets that I dug out, $40. each plus the cost of shipping. Mel

Per order of interest, 1st: flashed, 2nd: shawnlo72, 3rd: rpmgroup

shawno72 · 01-23-2012, 09:51 AM

Thank you Mel but I'll pass.
Posted via Mobile Device

drewskiren · 01-23-2012, 10:10 AM

Can I get in line for one of these?

**Classic Bowties** · 01-25-2012, 01:22 AM

Quote:

Originally Posted by Classic Bowties

Per order of interest, 1st: flashed, 2nd: shawnlo72, 3rd: rpmgroup

Quote:

Originally Posted by drewskiren

Can I get in line for one of these?

Updated interest as of 1/24: flashed pm'ed an unwanted offer, shawnlo72 passed above in 2nd post & I haven't heard from rpmgroup since 1/21 @ 10:20. So they are both available yet and you can take your pic drewskiren. Let me know your ship to Zip and I can figure a total. Mel

drewskiren · 01-25-2012, 01:59 AM

it looks like the better of the 2 is the white one? You tell me. ship to 38119

**Classic Bowties** · 01-25-2012, 02:17 AM

Quote:

Originally Posted by drewskiren

it looks like the better of the 2 is the white one? You tell me. ship to 38119

Fedex ground $18. to 38119, let me know if you want to send a postal moneyorder or if paypal is prefered, pm me your email address and I will send you an invoice. Mel

**Classic Bowties** · 01-25-2012, 02:21 AM

I do not think one is better than the other, they are both problem free usable as is pieces. The orange one is orginal paint and the one you called white is actually grey primer over 1972 #525 yellow. Mel

drewskiren · 01-25-2012, 11:46 AM

Mel, I appreciate your efforts, but since the already powdercoated and ready to install one from LMC is $10 cheaper shipped than yours, it makes no sense to get yours unless it is more like $30 shipped. Let me know your thoughts.

flashed · 01-25-2012, 01:49 PM

Bowties ,Im sorry if my offer offended you ,I was just looking at the same one from LMC mentioned above and considering my cost to have it blasted and painted to match.
John

CrewCab59 · 01-25-2012, 04:46 PM

Mel,

Do you have any hardware to go with them ? Ship quote 37721

Thanks

**Classic Bowties** · 01-26-2012, 01:39 AM

Quote:

Originally Posted by drewskiren

Mel, I appreciate your efforts, but since the already powdercoated and ready to install one from LMC is $10 cheaper shipped than yours, it makes no sense to get yours unless it is more like $30 shipped. Let me know your thoughts.

Quote:

Originally Posted by flashed

Bowties ,Im sorry if my offer offended you ,I was just looking at the same one from LMC mentioned above and considering my cost to have it blasted and painted to match.
John

Hey Guys, no offense was taken here I just cannot accept/end up with $12.-$15. after shipping a part that I only have a couple of and have gotten $40.-$50. for in years past. Lmc's p/n 38-3196 Taiwan piece will probably do each of you just fine @ $55. shipped, it looks like it could be built in the common weekender's garage and in my opinion will never be an equal replacement for the factory OE offered option #P13 piece while you can still find them. Mel

**Classic Bowties** · 01-26-2012, 01:53 AM

Quote:

Originally Posted by CrewCab59

Mel,

Do you have any hardware to go with them ? Ship quote 37721

Thanks

No harware was with either of these when they were removed from 70 & 72 trucks, I have only seen a couple of them with what I think is the correct threaded rod w/flat plate at one end, most guys just use a long 1/2" carriage bolt with a nut or wingnut. Cost for you would be $40. + $18. to Corryton Zip 37721. Mel

CrewCab59 · 02-14-2012, 05:23 PM

Quote:

Originally Posted by Classic Bowties

No harware was with either of these when they were removed from 70 & 72 trucks, I have only seen a couple of them with what I think is the correct threaded rod w/flat plate at one end, most guys just use a long 1/2" carriage bolt with a nut or wingnut. Cost for you would be $40. + $18. to Corryton Zip 37721. Mel

Mel, do you still have both of them? If so what payments?

Thanks

landsurvey1 · 02-14-2012, 05:57 PM

It's really none of my business, but I thought I would put my .02 in. I used to have the LMC spare tire holder on my truck and it worked fine. With that said, it is not even close to the original spare tire holders I have on now. The ones I bought were in the same, maybe worse condition than the ones you guys are looking at. I went to the auto paint store and had them mix an aerosol rattle can with my paint code, it was $20.00. I went home and sanded the parts down, sprayed them with primer, paint and clear from a rattle can and installed. Then I went to Ace Hardware and bought a 6 inch carriage bolt with some washers and a nut, drilled a hole in a piece of angle iron and there you have it, an afternoons worth of time.

**Classic Bowties** · 02-14-2012, 09:42 PM

Quote:

Originally Posted by CrewCab59

Mel, do you still have both of them? If so what payments?

Thanks

Yes, I have both of them yet and would do $90. for both of them shipped together to Corryton Zip 37721 by fedex ground, payment by USPS moneyorder or If you want to use paypal you can pm me an e-mail address and I will send you an invoice through pp. Mel

CrewCab59 · 02-14-2012, 09:49 PM

Quote:

Originally Posted by Classic Bowties

Yes, I have both of them yet and would do $90. for both of them shipped together to Corryton Zip 37721 by fedex ground, payment by USPS moneyorder or If you want to use paypal you can pm me an e-mail address and I will send you an invoice through pp. Mel

I will take both ! ,PM sent with info. Payment sent!

Thanks
Scott

**Furno68C20** · 09-25-2020, 11:32 AM

long shot here but do you still have the Red carrier for sale?

Willys_MB · 09-25-2020, 11:33 AM

Quote:

Originally Posted by Furno68C20

long shot here but do you still have the Red carrier for sale?

It's an 8 year old post and the guy in front of you said he'd take both and sent payment. I bet they're gone

01-23-2012, 08:23 AM	#1
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,865	Pics for flashed, shawno72 & rpmgroup Here are the two optional P13 fleetside in bed spare tire mounting brackets that I dug out, $40. each plus the cost of shipping. Mel Per order of interest, 1st: flashed, 2nd: shawnlo72, 3rd: rpmgroup Attached Images

01-23-2012, 09:51 AM	#2
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: Pics for flashed, shawno72 & rpmgroup Thank you Mel but I'll pass. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-23-2012, 10:10 AM	#3
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: Pics for flashed, shawno72 & rpmgroup Can I get in line for one of these? __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

01-25-2012, 02:21 AM	#7
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,865	Re: Pics for flashed, shawno72 & rpmgroup I do not think one is better than the other, they are both problem free usable as is pieces. The orange one is orginal paint and the one you called white is actually grey primer over 1972 #525 yellow. Mel

01-25-2012, 11:46 AM	#8
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: Pics for flashed, shawno72 & rpmgroup Mel, I appreciate your efforts, but since the already powdercoated and ready to install one from LMC is $10 cheaper shipped than yours, it makes no sense to get yours unless it is more like $30 shipped. Let me know your thoughts. __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

01-25-2012, 01:59 AM	#5
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: Pics for flashed, shawno72 & rpmgroup it looks like the better of the 2 is the white one? You tell me. ship to 38119 __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

01-25-2012, 01:49 PM	#9
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Pics for flashed, shawno72 & rpmgroup Bowties ,Im sorry if my offer offended you ,I was just looking at the same one from LMC mentioned above and considering my cost to have it blasted and painted to match. John

01-25-2012, 04:46 PM	#10
CrewCab59 Registered User Join Date: Jul 2010 Location: Knoxville,TN Posts: 1,185	Re: Pics for flashed, shawno72 & rpmgroup Mel, Do you have any hardware to go with them ? Ship quote 37721 Thanks __________________ 1972 Custom Deluxe 20 4x4 burb 1971 GMC SWB CST 4x4 1972 GMC k20 4x4 (X- brush truck ) 1971 Chevy CST Blazer 4x4 1971 Chevy C/10 1970 Cab Chassis C30 157" 1971 Cab Chassis Custom 30 Deluxe 157" 292/4spd ( Napco Replica ) 1988 Chevy V30 4x4 wrecker challenger 4812

02-14-2012, 05:57 PM	#14
landsurvey1 Registered User Join Date: Jan 2009 Location: Arizona Posts: 404	Re: Pics for flashed, shawno72 & rpmgroup It's really none of my business, but I thought I would put my .02 in. I used to have the LMC spare tire holder on my truck and it worked fine. With that said, it is not even close to the original spare tire holders I have on now. The ones I bought were in the same, maybe worse condition than the ones you guys are looking at. I went to the auto paint store and had them mix an aerosol rattle can with my paint code, it was $20.00. I went home and sanded the parts down, sprayed them with primer, paint and clear from a rattle can and installed. Then I went to Ace Hardware and bought a 6 inch carriage bolt with some washers and a nut, drilled a hole in a piece of angle iron and there you have it, an afternoons worth of time. Attached Images __________________ 1972 Chevy short bed ZZ4 350/355hp GMPP crate engine. 1972 Cheyenne K-20 454/400hp big block 1988 Jeep Wrangler 2010 Jeep Sport Unlimited

09-25-2020, 11:32 AM	#17
Furno68C20 Senior Member Join Date: Mar 2019 Location: Somonauk IL Posts: 328	Re: Pics for flashed, shawno72 & rpmgroup long shot here but do you still have the Red carrier for sale? __________________ 67 C10 Fleetside SOLD 67 C10 SWB Fleetside 67 C20 Fleetside 68 C10 Fleetside 68 C20 Fleetside SOLD 72 k20 Pay Pal: Grant.Furneaux@gmail.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.