LS engine covers? (stock or not)

[Cmillwheels]

Originally Posted by Factory Guy

Do you have the part numbers?

part numbers I ordered are as follows:

the upper cover number is 19355583
the drivers side cover is 19355582
the pass side cover is 19355580
intake manifold bracket 12561510

you will also need some misc bolts and
rubber grommets but these are the major parts.

Good Luck!

[Factory Guy]

Originally Posted by Cmillwheels

part numbers I ordered are as follows:

the upper cover number is 19355583
the drivers side cover is 19355582
the pass side cover is 19355580
intake manifold bracket 12561510

you will also need some misc bolts and
rubber grommets but these are the major parts.

Good Luck!

Thanks!

[TA_C10]

Originally Posted by Cmillwheels

part numbers I ordered are as follows:

the upper cover number is 19355583
the drivers side cover is 19355582
the pass side cover is 19355580
intake manifold bracket 12561510

you will also need some misc bolts and
rubber grommets but these are the major parts.

Good Luck!

Anybody happen to know if these will fit the 5.3L ?

.

[Cmillwheels]

Originally Posted by TA_C10

Anybody happen to know if these will fit the 5.3L ?

.

Yep, they sure will. I installed them on a 2006 5.3L L33 engine that I retrofitted with a Trailblazer SS intake manifold. There were a few modifications i had to make because of the TBSS manifold, but these should bolt bolt right up to a stock truck manifold of similar vintage without any issues.

[danny27]

Can anyone tell me if this will fit a 5.3 with truck intake. Current intake cover has two bolts instead of one.

Thanks,
DH