Need Help on Front disc brake swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jover · 07-01-2004, 11:22 AM

Hey Everyone: I know its been a long time since I've posted anything, figured I'd give all my favorite truck guys a break! Now, I have a 68 Chevy Stepside and I've been offered a 1977 GMC for any parts I might need. My question is I would like to turn my 68 over to disc brakes in the front and I know this 77 stuff will fit on mine or at least I think it will. I need to know exactly what I need to take off this 1977, and how much of a pain in butt will it be to make the swap. I need to do it pretty ASAP as my local junkyard won't hold this truck long before he sends it to its demise. Both the 77 and my 68 are 1/2tons. Any help you can give me in detail a girl can understand would be appreciated. Thanks in advance. JoAnne

krue · 07-01-2004, 01:09 PM

From what I understand, the easiest way is to just get the entire front crossmember and put it on your truck. I haven't done the swap myself but there are plenty on here who have. Good luck.

*chevytruckfan* · 07-01-2004, 03:55 PM

See the post I made here in this thread.

I did this swap from a 72 to 47 but the same thing applies from a 77 to 68.

kaycee · 07-01-2004, 10:29 PM

Yes I went from 69 to a 74 front end and I swapped the whole front crossmember just had to elongate a hole on each side.The brake hoses will have to be re routed as they go to the front on the newer setup,they wenr to the back of the a-arm on the older ones.You will have to get a master cyl. for disc/drum allso about $20.It is a real easy swap and well worht it.GOOD LUCK

**RPOZ11** · 07-02-2004, 01:25 AM

Where are you located? I have a set of front 5-lug 1/2 ton discs, spindles, backing plates, calipers( I think-will have to look again) from a 1972 step side. They are original use, and will need rebuilding...Not sure what I want for them but...let me know...

curley1 · 07-03-2004, 12:08 AM

Z11: Hey, I might be interested in your spindles and other parts. Let me know, I'm in Central CA, where are you located?

Curley

07-01-2004, 11:22 AM	#1
jover Registered User Join Date: May 2000 Location: Mexico, NY, USA Posts: 73	Need Help on Front disc brake swap Hey Everyone: I know its been a long time since I've posted anything, figured I'd give all my favorite truck guys a break! Now, I have a 68 Chevy Stepside and I've been offered a 1977 GMC for any parts I might need. My question is I would like to turn my 68 over to disc brakes in the front and I know this 77 stuff will fit on mine or at least I think it will. I need to know exactly what I need to take off this 1977, and how much of a pain in butt will it be to make the swap. I need to do it pretty ASAP as my local junkyard won't hold this truck long before he sends it to its demise. Both the 77 and my 68 are 1/2tons. Any help you can give me in detail a girl can understand would be appreciated. Thanks in advance. JoAnne

07-01-2004, 01:09 PM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	From what I understand, the easiest way is to just get the entire front crossmember and put it on your truck. I haven't done the swap myself but there are plenty on here who have. Good luck. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

07-01-2004, 10:29 PM	#4
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,445	Yes I went from 69 to a 74 front end and I swapped the whole front crossmember just had to elongate a hole on each side.The brake hoses will have to be re routed as they go to the front on the newer setup,they wenr to the back of the a-arm on the older ones.You will have to get a master cyl. for disc/drum allso about $20.It is a real easy swap and well worht it.GOOD LUCK __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327

07-02-2004, 01:25 AM	#5
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Where are you located? I have a set of front 5-lug 1/2 ton discs, spindles, backing plates, calipers( I think-will have to look again) from a 1972 step side. They are original use, and will need rebuilding...Not sure what I want for them but...let me know... __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS Last edited by RPOZ11; 07-02-2004 at 01:29 AM.

07-03-2004, 12:08 AM	#6
curley1 Registered User Join Date: Jan 2004 Location: los banos, ca Posts: 84	spindles Z11: Hey, I might be interested in your spindles and other parts. Let me know, I'm in Central CA, where are you located? Curley

07-01-2004, 03:55 PM	#3
chevytruckfan Account Suspended Join Date: May 2004 Location: Lake Placid, Florida Posts: 930	See the post I made here in this thread. I did this swap from a 72 to 47 but the same thing applies from a 77 to 68.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.