pics of correct bucket seat brackets 69-72??? Anyone??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tkeduk8r** · 06-30-2004, 08:14 AM

I was just looking to see if anyone had any pics of the correct pass and driver bucket seat brackets.. I found a 67/8 near me with the 69-72 buckets in it and it has been sitting for YEARS, but i dont knwo what the correct brackets look like.. thanks in advance...
--Mike

**tkeduk8r** · 06-30-2004, 05:47 PM

ttt...

cdowns · 06-30-2004, 07:10 PM

the pass seats are just 2pieces of flat metal with flanges on the top and bottom (non-adjustable) the driver side is just like the 2for the bench seat

Tx Firefighter · 06-30-2004, 08:58 PM

There's a dude on here, I think his name is Rod. He seems to be a seat guru on these trucks. Try sending him a PM or email.

ljbear · 06-30-2004, 09:10 PM

Here's a set, may be hard to get all the detail but it should give you an idea if what you are looking at is correct. I'll try and get the drivers side if no one else gets one first.

Rod · 07-01-2004, 06:12 PM

these are correct bucket brackets for 69-72 trucks.

**tkeduk8r** · 07-02-2004, 09:06 PM

Thanks man, thats what i needed to see... now if I can only get the guy to part with the pick up.... it is a 67-68, bu tthe brackets look like th ones in the truck... by the way i have a few old sbench seat brackets in MINT shape that I restored a few years ago.. Is the drivers side essentially a left and right bench seat bracket with a shorter wire or cable between the two??? I also have a nice pair of buckets out of a 70 blazer I am going to use... thanks for the replys...
--Mike

Rod · 07-03-2004, 12:28 AM

Thats the difference between truck regular seat brackets and truck bucket seat brackets. Bucket brackets mount on the sides of the seat while bench seat mounts to the front and back of the seat.

Can't really swap the tops either.

The blazer drivers side bucket brackets are the same as a trucks bucket seat drivers side brackets.

06-30-2004, 08:14 AM	#1
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	pics of correct bucket seat brackets 69-72??? Anyone??? I was just looking to see if anyone had any pics of the correct pass and driver bucket seat brackets.. I found a 67/8 near me with the 69-72 buckets in it and it has been sitting for YEARS, but i dont knwo what the correct brackets look like.. thanks in advance... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

06-30-2004, 05:47 PM	#2
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	ttt... __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

06-30-2004, 07:10 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	the pass seats are just 2pieces of flat metal with flanges on the top and bottom (non-adjustable) the driver side is just like the 2for the bench seat __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

06-30-2004, 08:58 PM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	There's a dude on here, I think his name is Rod. He seems to be a seat guru on these trucks. Try sending him a PM or email. __________________ I'm on the Instagram- @Gearhead_Kevin

06-30-2004, 09:10 PM	#5
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	Passenger Side Seat Stands Here's a set, may be hard to get all the detail but it should give you an idea if what you are looking at is correct. I'll try and get the drivers side if no one else gets one first. Attached Images __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

07-01-2004, 06:12 PM	#6
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	these are correct bucket brackets for 69-72 trucks. Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

07-02-2004, 09:06 PM	#7
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Thanks man, thats what i needed to see... now if I can only get the guy to part with the pick up.... it is a 67-68, bu tthe brackets look like th ones in the truck... by the way i have a few old sbench seat brackets in MINT shape that I restored a few years ago.. Is the drivers side essentially a left and right bench seat bracket with a shorter wire or cable between the two??? I also have a nice pair of buckets out of a 70 blazer I am going to use... thanks for the replys... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

07-03-2004, 12:28 AM	#8
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Thats the difference between truck regular seat brackets and truck bucket seat brackets. Bucket brackets mount on the sides of the seat while bench seat mounts to the front and back of the seat. Can't really swap the tops either. The blazer drivers side bucket brackets are the same as a trucks bucket seat drivers side brackets. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.