55.2-59 heater hose Grommet - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MD2020 · 10-19-2020, 02:27 PM

I want 1 large grommet for firewall, all 4, A/C and heater hose go threw one grommet in firewall?
I see this on Iron Resurrection

**Rickysnickers** · 10-19-2020, 09:59 PM

Are you meaning something like this? https://www.vintageair.com/hose-kits...-Way%20Diamond

Black93GT · 10-19-2020, 10:00 PM

Are you looking for bulkhead fittings??

Restomod Air

Nostalgic AC

MD2020 · 10-19-2020, 10:15 PM

Like this

https://watsons-streetworks.com/prod...-pass-through/

**mr48chev** · 10-20-2020, 07:05 PM

That isn't going to work with multiple hoses It's for just as it shows in the add, putting around one larger pipe.

Here is another link with multiple options for bulkhead fittings http://www.tbiproducts.com/index.cfm...e=cat/cat8.htm

MD2020 · 10-20-2020, 07:48 PM

mr48 Yes I have a 4 way bulkhead AN threaded that I will not be using.
It needs 8 fittings just for that fitting, I will not be using worm hose clamps either.
It's going to be hard enough to hook up all the line to the A/C unit under that dash.

It's not going to be perfect but it's going to look Awesome

**mr48chev** · 10-20-2020, 09:29 PM

You would probably better off to take a sheet of rubber about 3/8 inch thick cut in a circle large enough to run the four hoses though, punch correct size holes for each hose in the pattern you want and use something like a ring off a shifter boot or your own ring to hold it in place.

10-19-2020, 02:27 PM	#1
MD2020 Registered User Join Date: Sep 2018 Location: Batesville,MISSISSIPPI Posts: 312	heater hose Grommet I want 1 large grommet for firewall, all 4, A/C and heater hose go threw one grommet in firewall? I see this on Iron Resurrection

10-19-2020, 09:59 PM	#2
Rickysnickers Senior Member Join Date: Oct 2014 Location: Eagle, ID Posts: 3,057	Re: heater hose Grommet Are you meaning something like this? https://www.vintageair.com/hose-kits...-Way%20Diamond

10-19-2020, 10:00 PM	#3
Black93GT Registered User Join Date: Aug 2014 Location: Vacaville, CA Posts: 133	Re: heater hose Grommet Are you looking for bulkhead fittings?? Restomod Air Nostalgic AC __________________ '49 3600 build SBC 350, a T-5 and some patina

10-19-2020, 10:15 PM	#4
MD2020 Registered User Join Date: Sep 2018 Location: Batesville,MISSISSIPPI Posts: 312	Re: heater hose Grommet Like this https://watsons-streetworks.com/prod...-pass-through/

10-20-2020, 07:05 PM	#5
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: heater hose Grommet That isn't going to work with multiple hoses It's for just as it shows in the add, putting around one larger pipe. Here is another link with multiple options for bulkhead fittings http://www.tbiproducts.com/index.cfm...e=cat/cat8.htm __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

10-20-2020, 07:48 PM	#6
MD2020 Registered User Join Date: Sep 2018 Location: Batesville,MISSISSIPPI Posts: 312	Re: heater hose Grommet mr48 Yes I have a 4 way bulkhead AN threaded that I will not be using. It needs 8 fittings just for that fitting, I will not be using worm hose clamps either. It's going to be hard enough to hook up all the line to the A/C unit under that dash. It's not going to be perfect but it's going to look Awesome

10-20-2020, 09:29 PM	#7
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: heater hose Grommet You would probably better off to take a sheet of rubber about 3/8 inch thick cut in a circle large enough to run the four hoses though, punch correct size holes for each hose in the pattern you want and use something like a ring off a shifter boot or your own ring to hold it in place. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.