Tools for the job? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 10-11-2020, 12:46 PM

Is there a sticky for having the list of tools to do certain jobs on our truck?
I was just wondering if we had a place to put what we use to do work on the truck.

Like I just pulled the cluster out of the ramp truck to see what had happen to the tach. It stopped working about month ago. Got it out and one of the studs is broken inside. I can pull it out but it's not hooked to anything it just spins.

Here is what I used.

Ratchet with extension and 1/2” socket.
For loosening the column up.
Pliers for the speedometer cable if it’s tight.
Large Philips head screw driver for dash screws under the dash.
Small Phillips head for cluster screws.
Small flat blade for wiper knob.
8 mm wrench for factory oil line.
Needle nose pliers for head light & wiper collar removal.
Remember to disconnect the battery before you pull the head light switch out. Mine is a 10mm nut but the size will be different depending on the cable used.

To get the cluster a part once out of the truck.

1/4 drive ratchet with extension and 1/4” socket for the outer screws and grounds. The back panels also. (note) You don't have to take the out screws out if removing the back panels, just the printed circuit so you can get to the 1/4" screws.
Then a 5/16” socket for the nuts holding the printed circuit to the cluster.
You have the twist lock bulb holders also. You have to be careful taking the instrument nuts loose.

**Getter-Done** · 10-11-2020, 01:10 PM

Great Idea

I have often thought about a (must have) list of tools to keep in the truck while driving.

.

Andy4639 · 10-11-2020, 01:12 PM

Thanks,
well this could be for that also. I didn't think about it on the road but it would be a good idea.

**71CHEVYSHORTBED402** · 10-21-2020, 07:56 PM

Wiper arm remover/installer:https://shop.snapon.com/product/Wind...oval-Tool/A192

8" #1 Philips screw driver to remove an ashtray housing.

These can come in handy: https://www.summitracing.com/parts/s...AaAk0jEALw_wcB

Andy4639 · 10-21-2020, 08:20 PM

Yes they are handy and I have both but not snap on brand.

10-11-2020, 01:10 PM	#2
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,442	Re: Tools for the job? Great Idea I have often thought about a (must have) list of tools to keep in the truck while driving. . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

10-11-2020, 01:12 PM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Tools for the job? Thanks, well this could be for that also. I didn't think about it on the road but it would be a good idea. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

10-21-2020, 07:56 PM	#4
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,329	Re: Tools for the job? Wiper arm remover/installer:https://shop.snapon.com/product/Wind...oval-Tool/A192 8" #1 Philips screw driver to remove an ashtray housing. These can come in handy: https://www.summitracing.com/parts/s...AaAk0jEALw_wcB __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

10-21-2020, 08:20 PM	#5
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Tools for the job? Yes they are handy and I have both but not snap on brand. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

10-11-2020, 12:46 PM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Tools for the job? Is there a sticky for having the list of tools to do certain jobs on our truck? I was just wondering if we had a place to put what we use to do work on the truck. Like I just pulled the cluster out of the ramp truck to see what had happen to the tach. It stopped working about month ago. Got it out and one of the studs is broken inside. I can pull it out but it's not hooked to anything it just spins. Here is what I used. Ratchet with extension and 1/2” socket. For loosening the column up. Pliers for the speedometer cable if it’s tight. Large Philips head screw driver for dash screws under the dash. Small Phillips head for cluster screws. Small flat blade for wiper knob. 8 mm wrench for factory oil line. Needle nose pliers for head light & wiper collar removal. Remember to disconnect the battery before you pull the head light switch out. Mine is a 10mm nut but the size will be different depending on the cable used. To get the cluster a part once out of the truck. 1/4 drive ratchet with extension and 1/4” socket for the outer screws and grounds. The back panels also. (note) You don't have to take the out screws out if removing the back panels, just the printed circuit so you can get to the 1/4" screws. Then a 5/16” socket for the nuts holding the printed circuit to the cluster. You have the twist lock bulb holders also. You have to be careful taking the instrument nuts loose. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.