AR WTB Cab Window channel cuts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KMC3420 · 10-23-2020, 05:44 PM

Curious if anybody could help me out with a few cab cuts. I figure a good used piece would be much easier than attempting to make my own on this one.

Below are the two pieces needed. Let me know, thanks.

Passenger side:
Name: Window_1.jpg
Views: 97
Size: 60.3 KB

Name: Window_1.jpg
Views: 97
Size: 60.3 KB

Driver side:
Name: Window.jpg
Views: 91
Size: 65.2 KB

Astro-Balls · 10-23-2020, 08:51 PM

Not specific to our trucks, but some of these repair sections might help you.
https://www.rustreplace.com/home/196...evelle/1966-67

**atog** · 10-23-2020, 11:06 PM

If you don’t find any sooner. I have a few cabs I could cut pieces out of at my farm but won’t be there till first of week.

KMC3420 · 10-23-2020, 11:54 PM

Quote:

Originally Posted by Astro-Balls

Not specific to our trucks, but some of these repair sections might help you.
https://www.rustreplace.com/home/196...evelle/1966-67

Thanks.

KMC3420 · 10-23-2020, 11:57 PM

Quote:

Originally Posted by atog

If you don’t find any sooner. I have a few cabs I could cut pieces out of at my farm but won’t be there till first of week.

Sounds good. I have a local guy looking tomorrow AM. If that falls through I will take you up on that offer. I need 5-6” on each piece if that is doable. I will let you know tomorrow. Thanks.

**Clatterville trolley** · 10-24-2020, 03:07 PM

Quote:

Originally Posted by KMC3420

Sounds good. I have a local guy looking tomorrow AM. If that falls through I will take you up on that offer. I need 5-6” on each piece if that is doable. I will let you know tomorrow. Thanks.

If your other options fall through I have those pieces that can be cut from a cab I have already cut some patch panels off of. Just let me know. Jay

10-23-2020, 05:44 PM	#1
KMC3420 Registered User Join Date: Dec 2012 Location: Harrison, AR Posts: 1,065	WTB Cab Window channel cuts Curious if anybody could help me out with a few cab cuts. I figure a good used piece would be much easier than attempting to make my own on this one. Below are the two pieces needed. Let me know, thanks. Passenger side: Driver side: __________________ Keagan 68 SWB C-10 original 350 A/C 503 Mean Green

10-23-2020, 08:51 PM	#2
Astro-Balls Registered User Join Date: Feb 2019 Location: Nor Cal Posts: 822	Re: WTB Cab Window channel cuts Not specific to our trucks, but some of these repair sections might help you. https://www.rustreplace.com/home/196...evelle/1966-67 __________________ 1968 C20 Fleetside 396 4sp PS PB AC CST . https://www.youtube.com/watch?v=RWK8GgWD4uA

10-23-2020, 11:06 PM	#3
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,537	Re: WTB Cab Window channel cuts If you don’t find any sooner. I have a few cabs I could cut pieces out of at my farm but won’t be there till first of week.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.