07-04-2004, 06:14 PM | #1 |
Registered User
Join Date: Mar 2004
Location: Northern Illinois
Posts: 15
|
No "Accessory"
I lost my accessory option with the key. It worked a while ago and now when i turn the key back i get nothing. time for a new switch? i replaced the lock cylinder a while back but it worked after that. any ideas would be great! thanks
|
07-05-2004, 10:47 AM | #2 |
Registered User
Join Date: Oct 2002
Location: Edmond, OK
Posts: 5,904
|
ignition switch, not the lock cylinder... the ignition switch is on the top of the column under the dash. as long as you get it aligned right... run is the off position and start is the run position and things get funky.
|
07-05-2004, 11:23 AM | #3 |
Registered User
Join Date: Mar 2004
Location: Northern Illinois
Posts: 15
|
I know it wasn't the lock cylinder, but i replaced it because it was a little sloppy when i fixed the infamous tilt column on these trucks... i figured it was either the switch or an alignment issue, i just wanted to see if there was something i was overlooking... thanks!
|
Bookmarks |
|
|