How far should I go with paint prep?

[notsolo]

On your respirator, how many more cars and trucks are you going to paint? A full tyvek bunny suit and a good respirator, Should be fine...move the fumes out of you area. I have a fan blowing in and a fan blowing out, keep the air moving, use a filter on both if you can. 1st I've seen of the battery power air supply, no reviews yet? ..On your materials, Epoxy is great, are your panels that rough that you need polyester filler? Spot fill bare metal, Epoxy, spot fill, guide coat another coat of epoxy, wait a couple days, sand and top coat. Just my 2 cents.

[Jim70Chevy]

Originally Posted by notsolo

On your respirator, how many more cars and trucks are you going to paint? A full tyvek bunny suit and a good respirator, Should be fine...move the fumes out of you area. I have a fan blowing in and a fan blowing out, keep the air moving, use a filter on both if you can. 1st I've seen of the battery power air supply, no reviews yet? ..On your materials, Epoxy is great, are your panels that rough that you need polyester filler? Spot fill bare metal, Epoxy, spot fill, guide coat another coat of epoxy, wait a couple days, sand and top coat. Just my 2 cents.

This will likely be my first and last real paint job. Too much work and mess. I will look into the fans and try to be as ventilated as possible.

I wasn't sure about the poly fill. Just read that that was the best approach. I can make the panels pretty straight with standard filler and epoxy. Just didn't want to skip a step.