Is this a Blazer rear seat?

[Spf79]

Hi,

Can anyone confirm what this seat is out of? Blazer? Is there a difference in years of of the 69-72 rear seat? I traded some parts for this a few years back and am now getting ready for interior.

Or is this a suburban rear seat, or are they the same?

Sorry if this was covered in a different post. I did a quick search and did not see anything that answered my questions in total.

Thank you!

[Getter-Done]

Here is one thread that may help?

Link:https://67-72chevytrucks.com/vboard/...azer+rear+seat



I just typed : blazer rear seat In the search






.

[Spf79]

Second question...

Can someone please measure the height at the top of their original sport bucket from the floor... and or utility bucket seats? I would also like to have the width.

I plan on losing the head rest, and armrest on these 2001 Denali seats before I have the redone to look original. Fingers crossed it works.

[3757chevy]

I'm going to say yes that is Blazer seat. My front seats are out till I can get them recovered . I have 2000 Cavalier seats with the headrest removed in place for now.

[Spf79]

Originally Posted by 3757chevy

I'm going to say yes that is Blazer seat. My front seats are out till I can get them recovered . I have 2000 Cavalier seats with the headrest removed in place for now.

What did you do for a mounting plate?
Looks good, size fitment wise.

[Spf79]

Headrest is gone, and the seat is just set in there unbolted.
Oldest child is 5'10"... giant feet.

[Spf79]

Originally Posted by Spf79

What did you do for a mounting plate?
Looks good, size fitment wise.

Thank you for the confirmation on the rear seat being a Blazer seat. I was just looking for a double check before disassembly.

[3757chevy]

Can't really see in this picture but the seat brackets are stock with an 1/8"x 2"strip of metal bolted to the bottom of the seat and then bolted to the brackets. They do sit a little low.

[Spf79]

Originally Posted by 3757chevy

Can't really see in this picture but the seat brackets are stock with an 1/8"x 2"strip of metal bolted to the bottom of the seat and then bolted to the brackets. They do sit a little low.

Hmmm, I look to be sitting about the same height compared to the center console. I almost felt a little perchy when sitting in it. I'm 6' on a good day.
Looks like I will have to do a thick plate that I can bolt down and then drill and tap for bolting down this seat with some grade goodies.

Your cooler is bad a$$.

[3757chevy]

HaHa the cooler is a dollar tree disposable cut down to fit.

[Spf79]

Originally Posted by 3757chevy

HaHa the cooler is a dollar tree disposable cut down to fit.

Still awesome.

[3757chevy]

I would like to put a spacer at the rear of the mount as the seat seems to lean back to much .

[Spf79]

Originally Posted by 3757chevy

I would like to put a spacer at the rear of the mount as the seat seems to lean back to much .

Agree, thinking I'm in the same boat looking at it. I need to put power to the seat and see how it feels adjusted first.

[jaros44sr]

Seems like my seat back is 28 plus 3 1/2, utility seats, width is 22 1/2

16078655408335315024430866047535 by [url=https://www.flickr.com/photos/97391199@N06

[Spf79]

[quote=jaros44sr;8849113]Seems like my seat back is 28 plus 3 1/2, utility seats, width is 22 1/2

16078655408335315024430866047535 by [url=https://www.flickr.com/photos/97391199@N06[/quote]

Excellent, thank you! This helps forn when I have them redone to look stock.
How high off of the floor is the bottom of the seat? Let me know when you can, I really appreciate it.

[jaros44sr]

rear is3 1/2, front is 5 1/4

[Spf79]

Originally Posted by jaros44sr

rear is3 1/2, front is 5 1/4

Thank you! Apparently I misread your original post where you had all.of that information.

I appreciate the help!

[jaros44sr]

Originally Posted by Spf79

Thank you! Apparently I misread your original post where you had all.of that information.

I appreciate the help!

No problem, glad I could be of help

You're right, that young man is going to be a tall lad