1990 blazer dash bezel question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

60burb4me · 12-20-2020, 03:13 PM

autometer dash
has anyone purchased an autometer dash bezel for a 1990 or 91 chevy blazer or suburban i need a new one and cant find any that fit properly.???

68Timber · 12-22-2020, 10:47 AM

I'm behind, I didn't know Autometer made a bezel for these. Link?

Where did you buy one that didn't fit properly?

60burb4me · 12-22-2020, 01:10 PM

Quote:

Originally Posted by 68Timber

I'm behind, I didn't know Autometer made a bezel for these. Link?

Where did you buy one that didn't fit properly?

Posted via Mobile Device

60burb4me · 12-22-2020, 01:13 PM

Quote:

Originally Posted by 60burb4me

Posted via Mobile Device

Didn’t. But rhymes have 2 different ones and one of them does not have a screw hole on the upper right side of the stereo. So I was wondering if that one would work Product #2137
Posted via Mobile Device

68Timber · 12-22-2020, 05:33 PM

Does classic industries not have one for a 90?

60burb4me · 12-22-2020, 06:32 PM

Quote:

Originally Posted by 68Timber

Does classic industries not have one for a 90?

Not that I have been able to find.
Posted via Mobile Device

SilverMiner · 12-27-2020, 05:19 PM

Quote:

Originally Posted by 68Timber

I'm behind, I didn't know Autometer made a bezel for these. Link?

Where did you buy one that didn't fit properly?

I'd never heard of an AutoMeter bezel either but it did make me curious. Here's a link to what the OP is apparently talking about.

It's not merely a replacement bezel - it's specifically designed to house AutoMeter gauges to replace the factory cluster. Interesting product, but far from inexpensive. It's listed only to fit 73 to 83 which I assume is due to the fact that it has the wiper window cutout which wouldn't exist from 84 on after the wipers moved to the turn signal stalk. The radio area is blanked out, and the bezel is otherwise just plain black plastic. I would imagine it could easily be installed in an 84-91 rig but I don't know what the open wiper switch window would reveal - I'm a 73-80 sort of fellow.

68Timber · 01-01-2021, 05:14 PM

OK. I hadn't seen that before, and I didn't know the DIN radio bezels weren't reproduced. I've never seen a review of the Autometer bezel, not sure about how it fits overall, but I'm pretty sure it's not going to fit the stock gauge cluster correctly.

12-20-2020, 03:13 PM	#1
60burb4me Registered User Join Date: Jan 2015 Location: apple valley california Posts: 98	1990 blazer dash bezel question autometer dash has anyone purchased an autometer dash bezel for a 1990 or 91 chevy blazer or suburban i need a new one and cant find any that fit properly.???

12-22-2020, 05:33 PM	#5
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: 1990 blazer dash bezel question Does classic industries not have one for a 90? __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

01-01-2021, 05:14 PM	#8
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: 1990 blazer dash bezel question OK. I hadn't seen that before, and I didn't know the DIN radio bezels weren't reproduced. I've never seen a review of the Autometer bezel, not sure about how it fits overall, but I'm pretty sure it's not going to fit the stock gauge cluster correctly. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

12-22-2020, 10:47 AM	#2
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: 1990 blazer dash bezel question I'm behind, I didn't know Autometer made a bezel for these. Link? Where did you buy one that didn't fit properly? __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.