CA WTB A-Pillar, LHS to fit 64...not sure of interchangeability - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CousinTone · 02-03-2021, 07:26 PM

I’m looking for left A-Pillar inner & outer assembly from top to Cowl for my 64 C20. Have rust on most of lip up top and down the interior bout 10-14 inches where the pinch weld and resulting seal mounting surface is pretty cruddy. If anyone has a cab thats willing to slice a part, I’d appreciate it. There are no repop panels I can find and considering my rockers are 100% fine, this leak only hit this area and the floor in the corner just a bit, si I’m counting myself pretty lucky...kinda

Any advice is also welcomed. I’m fairly new to this year(s) and how to attack rust where the 67-72 and on have panels available. Thanks

Anyone know if pick-a-part will let me sawzall a piece? TV

**cwcarpenter98** · 02-03-2021, 10:48 PM

You can get a pillar from any 64-66 cab

CousinTone · 02-04-2021, 04:00 PM

Quote:

Originally Posted by cwcarpenter98

You can get a pillar from any 64-66 cab

Thanks for the response. Wonder if pick-a-part will run me off when I pull out a sawzall?

Madkidd007 · 02-05-2021, 08:04 PM

Quote:

Originally Posted by CousinTone

Thanks for the response. Wonder if pick-a-part will run me off when I pull out a sawzall?

Nope, they won’t sell a vehicle to be put back on the road so cut anything you want.

**paulspickupparts** · 02-09-2021, 12:59 PM

Quote:

Originally Posted by CousinTone

I’m looking for left A-Pillar inner & outer assembly from top to Cowl for my 64 C20. Have rust on most of lip up top and down the interior bout 10-14 inches where the pinch weld and resulting seal mounting surface is pretty cruddy. If anyone has a cab thats willing to slice a part, I’d appreciate it. There are no repop panels I can find and considering my rockers are 100% fine, this leak only hit this area and the floor in the corner just a bit, si I’m counting myself pretty lucky...kinda

Any advice is also welcomed. I’m fairly new to this year(s) and how to attack rust where the 67-72 and on have panels available. Thanks

Anyone know if pick-a-part will let me sawzall a piece? TV

I have several 64- 66 Chevy cabs I am cutting. I get $40 and up for custom cuts. I would have to know exacty where you want it cut and inspect mine to make sure it is good. Thanks

CousinTone · 02-13-2021, 01:35 PM

Quote:

Originally Posted by paulspickupparts

I have several 64- 66 Chevy cabs I am cutting. I get $40 and up for custom cuts. I would have to know exacty where you want it cut and inspect mine to make sure it is good. Thanks

Let me take a picture and I’ll pm you. Sound good?

**paulspickupparts** · 02-13-2021, 04:41 PM

Sure , sounds. good . I made a few cuts yesterday but -19 below Sunday eve and -22 below Monday eve . Pretty sure my diesel will not start those two days . But starting on Wednesday a gradual warm up and could cut then. Thanks

cru_zn_29 · 02-13-2021, 07:33 PM

I have some good cabs for sale if that would save some money and time.

**paulspickupparts** · 02-15-2021, 02:31 PM

Honestly if Cru zn 29 has a good cab close to you that is the way I would go. Depending in the condition of the rest of your cab . I can still cut a pair but sometimes a good cab saves a lot of time and money .

CousinTone · 02-18-2021, 03:06 PM

Quote:

Originally Posted by cru_zn_29

I have some good cabs for sale if that would save some money and time.

Hey Cruzn29, how much are you asking for a fair condition cab, I believe 63-66 will work...I was looking for the pillars because since I’m Covid unemployed, cost does play into my decision. Would you consider a partial trade, my cab is great, except for this a Pilar issue and minimal floor rust. My rockers are 90% and dash is 100% virgin, economy air and can send pics, but understand if you’re just wanting to clear out your inventory...you’re not too far, so it would be nice to meet a local member too. Thanks. Tony

CousinTone · 02-18-2021, 03:06 PM

Quote:

Originally Posted by paulspickupparts

Honestly if Cru zn 29 has a good cab close to you that is the way I would go. Depending in the condition of the rest of your cab . I can still cut a pair but sometimes a good cab saves a lot of time and money .

Thanks for the advice Paul. If it doesn’t work out for entire cab, I’ll send you detailed, measured/noted pics of necessary area. Much appreciated. Tony

CousinTone · 02-26-2021, 11:45 PM

Cru_zn_29, what’s the pricing on your cabs? Sure would save lit of work but I need to get project moving and this is holding me up....let me know. Thanks.

CousinTone · 02-26-2021, 11:47 PM

Quote:

Originally Posted by paulspickupparts

Sure , sounds. good . I made a few cuts yesterday but -19 below Sunday eve and -22 below Monday eve . Pretty sure my diesel will not start those two days . But starting on Wednesday a gradual warm up and could cut then. Thanks

Paul, looks like I’ll get you some pics. Seems that Cru_zn_29 is not a regular poster and I’ve got to get this pig running and start enjoying her. I’ll look for a drawing I made for another person but I screwed that one up being a rookie at metal repair. Much better now. Stand by for pic. Thx

CousinTone · 02-26-2021, 11:56 PM

Does this give you an idea of what I’m needing? Let me know price...be gentle, I’m on the Covid payroll with the State of California Unemployment Office and they only pay sporadically if at all. Let me know and we can get this done. Tony

cru_zn_29 · 02-27-2021, 11:39 AM

60 61 62 63 are the same 64 65 66 are the same

CousinTone · 02-27-2021, 02:15 PM

Quote:

Originally Posted by cru_zn_29

60 61 62 63 are the same 64 65 66 are the same

Yes, I’m wanting to know your pricing??

CousinTone · 02-27-2021, 02:22 PM

Quote:

Originally Posted by paulspickupparts

Honestly if Cru zn 29 has a good cab close to you that is the way I would go. Depending in the condition of the rest of your cab . I can still cut a pair but sometimes a good cab saves a lot of time and money .

Paul, here’s a quick couple from my LHS. I’ll post more detailed with measurements so we’re 100% on the same page. Enjoy....LOL

cru_zn_29 · 02-27-2021, 03:16 PM

1960 1961 1962 1963 are the same 1964 1965 1966 are the same

CousinTone · 02-27-2021, 06:26 PM

Quote:

Originally Posted by cru_zn_29

1960 1961 1962 1963 are the same 1964 1965 1966 are the same

If you’re selling, h.ow much is your price? That’s all I’m trying to get here.

cru_zn_29 · 02-27-2021, 09:53 PM

The first time you asked the price and I told you 650.00 The price is still the same.

CousinTone · 02-28-2021, 04:26 PM

Quote:

Originally Posted by cru_zn_29

The first time you asked the price and I told you 650.00 The price is still the same.

No price in this thread. I’ll pass.....

cru_zn_29 · 02-28-2021, 09:56 PM

I don't understand that i did not send the price. I have sent the asking price 3
times in 3 E Mails ($650.00)

**nsb29** · 03-02-2021, 10:53 AM

It looks like on 1/29/21 Ken accidentally posted the price on a thread by short 3/4 in regards to a roof replacement so you’re both right

02-03-2021, 07:26 PM	#1
CousinTone Registered User Join Date: Jul 2015 Location: Placentia, CA Posts: 344	WTB A-Pillar, LHS to fit 64...not sure of interchangeability I’m looking for left A-Pillar inner & outer assembly from top to Cowl for my 64 C20. Have rust on most of lip up top and down the interior bout 10-14 inches where the pinch weld and resulting seal mounting surface is pretty cruddy. If anyone has a cab thats willing to slice a part, I’d appreciate it. There are no repop panels I can find and considering my rockers are 100% fine, this leak only hit this area and the floor in the corner just a bit, si I’m counting myself pretty lucky...kinda Any advice is also welcomed. I’m fairly new to this year(s) and how to attack rust where the 67-72 and on have panels available. Thanks Anyone know if pick-a-part will let me sawzall a piece? TV

02-03-2021, 10:48 PM	#2
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,492	Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability You can get a pillar from any 64-66 cab __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

02-13-2021, 04:41 PM	#7
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability Sure , sounds. good . I made a few cuts yesterday but -19 below Sunday eve and -22 below Monday eve . Pretty sure my diesel will not start those two days . But starting on Wednesday a gradual warm up and could cut then. Thanks

02-13-2021, 07:33 PM	#8
cru_zn_29 Registered User Join Date: Feb 2011 Location: Joshua Tree Ca. Posts: 719	Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability I have some good cabs for sale if that would save some money and time.

02-15-2021, 02:31 PM	#9
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability Honestly if Cru zn 29 has a good cab close to you that is the way I would go. Depending in the condition of the rest of your cab . I can still cut a pair but sometimes a good cab saves a lot of time and money .

02-26-2021, 11:45 PM	#12
CousinTone Registered User Join Date: Jul 2015 Location: Placentia, CA Posts: 344	Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability Cru_zn_29, what’s the pricing on your cabs? Sure would save lit of work but I need to get project moving and this is holding me up....let me know. Thanks.

02-27-2021, 11:39 AM	#15
cru_zn_29 Registered User Join Date: Feb 2011 Location: Joshua Tree Ca. Posts: 719	Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability 60 61 62 63 are the same 64 65 66 are the same

02-27-2021, 03:16 PM	#18
cru_zn_29 Registered User Join Date: Feb 2011 Location: Joshua Tree Ca. Posts: 719	Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability 1960 1961 1962 1963 are the same 1964 1965 1966 are the same

02-27-2021, 09:53 PM	#20
cru_zn_29 Registered User Join Date: Feb 2011 Location: Joshua Tree Ca. Posts: 719	Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability The first time you asked the price and I told you 650.00 The price is still the same.

02-28-2021, 09:56 PM	#22
cru_zn_29 Registered User Join Date: Feb 2011 Location: Joshua Tree Ca. Posts: 719	Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability I don't understand that i did not send the price. I have sent the asking price 3 times in 3 E Mails ($650.00)

03-02-2021, 10:53 AM	#23
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: WTB A-Pillar, LHS to fit 64...not sure of interchangeability It looks like on 1/29/21 Ken accidentally posted the price on a thread by short 3/4 in regards to a roof replacement so you’re both right __________________ Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.