61 apache 30 where can I get these hubcaps?! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scottmitchellrose · 03-16-2021, 02:00 PM

I have a 61 Apache 30 with a 9 foot (yes, that is correct- 2 were made that year) stepside. It was in several movies, one of which is "The Water is Wide" (story of Pat Conroy and the Gullah schoolchildren). Anyway, any idea where I can get 2 more of these 8 lug hubcaps (they are a bit like a pyramid, or .... well I won't say here what they really look like!).

scottmitchellrose · 03-16-2021, 02:01 PM

Hershey's kiss is kind of what the hubcaps look like...

**cwcarpenter98** · 03-16-2021, 09:54 PM

I do not know of any C20-C30 hubcaps that are being reproduced. If you have some local junkyards, you could check there or Ebay. Another option is to become a supporting member of this site so that you can post a WTB add in the classifieds.

**Steeveedee** · 03-16-2021, 10:35 PM

Any 1T step side will have a 9 foot bed, IIRC. I have no idea about where you would find those hub caps. There is a hub cap store not far from my MiL's house. Next time I go by there, if I remember, I'll stop in to see if they have any. It's unlikely, given the age, but you never know...I'll let you know, if I do stop by. They were painted white when new, yes?

**cwcarpenter98** · 03-16-2021, 11:03 PM

Quote:

Originally Posted by Steeveedee

Any 1T step side will have a 9 foot bed, IIRC.

I think you are remembering correctly. I pulled apart a 9 foot step bed from a 65 C30 this weekend

**The Rocknrod** · 03-17-2021, 06:29 AM

I think Wheel Vintiques has them. Or you can contact Aspen truck parts in Arizona, they might have used units.

scottmitchellrose · 03-17-2021, 10:01 AM

Quote:

Originally Posted by cwcarpenter98

I do not know of any C20-C30 hubcaps that are being reproduced. If you have some local junkyards, you could check there or Ebay. Another option is to become a supporting member of this site so that you can post a WTB add in the classifieds.

great ideas- and I need to- thanks a lot!

scottmitchellrose · 03-17-2021, 10:02 AM

Quote:

Originally Posted by Steeveedee

Any 1T step side will have a 9 foot bed, IIRC. I have no idea about where you would find those hub caps. There is a hub cap store not far from my MiL's house. Next time I go by there, if I remember, I'll stop in to see if they have any. It's unlikely, given the age, but you never know...I'll let you know, if I do stop by. They were painted white when new, yes?

i had no idea! Well my cousin was wrong then- unfortunately cancer got him a few years back. If you have time and are willing to check- please. They were white once. THANK YOU! Scott

scottmitchellrose · 03-17-2021, 10:03 AM

Quote:

Originally Posted by The Rocknrod

I think Wheel Vintiques has them. Or you can contact Aspen truck parts in Arizona, they might have used units.

Thanks very much. If the other attempts fail I will do that.

Scott

**MJN** · 03-17-2021, 10:32 AM

They are the same hubcaps back to '57. They show up on EBay from time to time but are larger diameter than caps used on 1/2 tons.

**cwcarpenter98** · 03-17-2021, 10:34 PM

Hey Scott,

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

03-16-2021, 02:00 PM	#1
scottmitchellrose Registered User Join Date: Feb 2015 Location: durham nc Posts: 124	61 apache 30 where can I get these hubcaps?! I have a 61 Apache 30 with a 9 foot (yes, that is correct- 2 were made that year) stepside. It was in several movies, one of which is "The Water is Wide" (story of Pat Conroy and the Gullah schoolchildren). Anyway, any idea where I can get 2 more of these 8 lug hubcaps (they are a bit like a pyramid, or .... well I won't say here what they really look like!). Attached Images

03-16-2021, 02:01 PM	#2
scottmitchellrose Registered User Join Date: Feb 2015 Location: durham nc Posts: 124	Re: 61 apache 30 where can I get these hubcaps?! Hershey's kiss is kind of what the hubcaps look like...

03-16-2021, 09:54 PM	#3
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,451	Re: 61 apache 30 where can I get these hubcaps?! I do not know of any C20-C30 hubcaps that are being reproduced. If you have some local junkyards, you could check there or Ebay. Another option is to become a supporting member of this site so that you can post a WTB add in the classifieds. __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

03-16-2021, 10:35 PM	#4
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,327	Re: 61 apache 30 where can I get these hubcaps?! Any 1T step side will have a 9 foot bed, IIRC. I have no idea about where you would find those hub caps. There is a hub cap store not far from my MiL's house. Next time I go by there, if I remember, I'll stop in to see if they have any. It's unlikely, given the age, but you never know...I'll let you know, if I do stop by. They were painted white when new, yes? __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

03-17-2021, 06:29 AM	#6
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 61 apache 30 where can I get these hubcaps?! I think Wheel Vintiques has them. Or you can contact Aspen truck parts in Arizona, they might have used units. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

03-17-2021, 10:32 AM	#10
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 2,998	Re: 61 apache 30 where can I get these hubcaps?! They are the same hubcaps back to '57. They show up on EBay from time to time but are larger diameter than caps used on 1/2 tons. __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

03-17-2021, 10:34 PM	#11
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,451	Re: 61 apache 30 where can I get these hubcaps?! Hey Scott, Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.