|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-29-2021, 09:04 PM
|
#1 |
|
Registered User
Join Date: Aug 2009
Location: Louisville,KY
Posts: 9
|
Under floor brake and clutch setup
Has anybody used this kit? 49 1/2 ton sbc/4 speed. Or any other kits out there?
https://www.speedwaymotors.com/TCI-6...bly,46285.html Last edited by Junkbike; 03-29-2021 at 09:06 PM. Reason: Truck info |
|
|
|
03-29-2021, 10:10 PM
|
#2 |
|
Registered User
Join Date: Feb 2013
Location: Fallbrook California
Posts: 250
|
Re: Under floor brake and clutch setup
I have Art Morrison's brake and clutch setup, SBC, 4 spd. It is installed but the build is far from finished so I am not really any help. I am concerned about the lack of room for both steering and exhaust but currently the bed and cab supports are the battle.
|
|
|
|
|
03-29-2021, 10:51 PM
|
#3 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,715
|
Re: Under floor brake and clutch setup
I made a bracket to mount the double master cylinder to the stock bracket the pedals hang on.
No photos but one could easily use the same principle and make one to hold a booster and MC. You have to make a much stronger and adjustable push rod though.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
