1969 Doors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

REDROCKER652002 · 04-02-2021, 02:08 PM

Greetings,

I just saw a listing on Craigslist for doors. He said they are from 67 to 72. Are the doors the same for all those years? Here is a link to the listing. What would be a fair price for them if they fit?

https://sfbay.craigslist.org/nby/pts...299795747.html

Thanks,

RR

**1970cstblazer** · 04-02-2021, 02:15 PM

1967-71 door shells are the same. Minor changes were made in 1972, but will still physically bolt on the cab.

**pjmoreland** · 04-02-2021, 02:28 PM

I believe 1967 doors are slightly different than 68-71 due to the angle of the screws that attach the exterior door handles.

tim_mc · 04-02-2021, 06:03 PM

I have a 69 drivers door on my 67. I don't think I had any unusual fitment issues. I got lucky...the 69 door was 503 light green and even had the same rust streaks from the west coast jr. mirrors.

**too much stuff** · 04-02-2021, 06:27 PM

A 67 door will fit, you will need a 67 exterior handle on it. 72 doors will fit also but have an extra screw near the top in side and require different door panels, and regulators.

**Grumpy old man** · 04-02-2021, 06:58 PM

I hope you went and bought all that stuff ,Because now that its on here anyone within a 100 miles is on their way to get it !

72c20customcamper · 04-02-2021, 10:10 PM

Aren’t the door cards mounted differently on 72 no screws has the push in clips

**Grumpy old man** · 04-02-2021, 10:31 PM

From the parts that are showing there it's a 69-70 .

**Sheepdip** · 04-03-2021, 07:36 AM

Quote:

Originally Posted by Grumpy old man

I hope you went and bought all that stuff ,Because now that its on here anyone within a 100 miles is on their way to get it !

It's in Mendocino County... one wrong turn off the beaten path and you will never be heard/seen again.

REDROCKER652002 · 04-03-2021, 01:56 PM

Quote:

Originally Posted by Grumpy old man

I hope you went and bought all that stuff ,Because now that its on here anyone within a 100 miles is on their way to get it !

I would love to, but my kid said no. I was thinking at least the doors to have in case his are bad, but he has no interest. I am thinking of offering 100 bucks each. Does that sound about right? If I don't use them I am sure I can find somebody to use them. LOL. His aren't that bad though, at least from what I can see.

**ga-stepside** · 04-03-2021, 03:13 PM

Quote:

Originally Posted by pjmoreland

I believe 1967 doors are slightly different than 68-71 due to the angle of the screws that attach the exterior door handles.

That is true. Turns out I have 67 on the passenger side and a later one on the driver side. Getting a non-67 door handle to bolt on to the 67 door is weird but possible.

REDROCKER652002 · 04-04-2021, 02:13 PM

post has been deleted. Somebody got the stuff

**Grumpy old man** · 04-04-2021, 02:22 PM

Rust free door around here go for $500.00 each , That truck had turbine wheels on it , I bought a truck like that a few years ago for $500.00 for all of it , the doors are on one of my 67's . The guy I bought it from called me back about 6 months later wanting to buy it back because none of his new repop parts fit . if you've got one of these trucks and find good rust free parts BUY EM !

04-02-2021, 02:08 PM	#1
REDROCKER652002 Registered User Join Date: Nov 2018 Location: South San Francisco CA, Posts: 441	1969 Doors Greetings, I just saw a listing on Craigslist for doors. He said they are from 67 to 72. Are the doors the same for all those years? Here is a link to the listing. What would be a fair price for them if they fit? https://sfbay.craigslist.org/nby/pts...299795747.html Thanks, RR

04-02-2021, 02:15 PM	#2
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,858	Re: 1969 Doors 1967-71 door shells are the same. Minor changes were made in 1972, but will still physically bolt on the cab. __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

04-02-2021, 02:28 PM	#3
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,010	Re: 1969 Doors I believe 1967 doors are slightly different than 68-71 due to the angle of the screws that attach the exterior door handles.

04-02-2021, 06:03 PM	#4
tim_mc Registered User Join Date: Jan 2019 Location: St Peters, MO Posts: 444	Re: 1969 Doors I have a 69 drivers door on my 67. I don't think I had any unusual fitment issues. I got lucky...the 69 door was 503 light green and even had the same rust streaks from the west coast jr. mirrors. Attached Images __________________ 1967 C20, 350 SBC w/Comp roller cam, 700R4 w/3.42 posi, PS, 4-wheel PDB, Old Air AC & GM Tilt column.

04-02-2021, 06:27 PM	#5
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: 1969 Doors A 67 door will fit, you will need a 67 exterior handle on it. 72 doors will fit also but have an extra screw near the top in side and require different door panels, and regulators. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-02-2021, 06:58 PM	#6
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: 1969 Doors I hope you went and bought all that stuff ,Because now that its on here anyone within a 100 miles is on their way to get it ! __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

04-02-2021, 10:10 PM	#7
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,739	Re: 1969 Doors Aren’t the door cards mounted differently on 72 no screws has the push in clips __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary. Last edited by 72c20customcamper; 04-03-2021 at 09:16 AM.

04-02-2021, 10:31 PM	#8
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: 1969 Doors From the parts that are showing there it's a 69-70 . __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

04-04-2021, 02:13 PM	#12
REDROCKER652002 Registered User Join Date: Nov 2018 Location: South San Francisco CA, Posts: 441	Re: 1969 Doors post has been deleted. Somebody got the stuff

04-04-2021, 02:22 PM	#13
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: 1969 Doors Rust free door around here go for $500.00 each , That truck had turbine wheels on it , I bought a truck like that a few years ago for $500.00 for all of it , the doors are on one of my 67's . The guy I bought it from called me back about 6 months later wanting to buy it back because none of his new repop parts fit . if you've got one of these trucks and find good rust free parts BUY EM ! __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.