Where does the a/c belt go? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Timbo · 07-13-2004, 07:13 PM

On a 72 402 I'm going to install the vinatge air system, but I'm not sure where the belt will go. I have the 3 groove crank pulley and 2 groove water pump pulley that came with the factory a/c, but I never had a belt going to the compressor, so I'm not sure exactly where it goes? I assume the new a/c belt will replace the short waterpump belt, but I want to make sure.

Thanks, Tim

franko72 · 07-13-2004, 07:18 PM

center groove on the crank pulley and the front groove on the water pump pulley.

07-13-2004, 07:13 PM	#1
Timbo Registered User Join Date: Feb 2003 Location: Cleburne, Texas Posts: 19	Where does the a/c belt go? On a 72 402 I'm going to install the vinatge air system, but I'm not sure where the belt will go. I have the 3 groove crank pulley and 2 groove water pump pulley that came with the factory a/c, but I never had a belt going to the compressor, so I'm not sure exactly where it goes? I assume the new a/c belt will replace the short waterpump belt, but I want to make sure. Thanks, Tim __________________ 1995 Z28 383 stroker 1969 SS Camaro drag car project 1972 Chevy 402 BB A/C PS,PB, TH-400

07-13-2004, 07:18 PM	#2
franko72 Franko72 Join Date: May 2004 Location: Cincinnati,Ohio Posts: 471	center groove on the crank pulley and the front groove on the water pump pulley. __________________ 1972 C20 cheyenne Super 402 BB/400 turbo LWB A/C Tilt, Cruise Control, Saddle tanks, Tach My Home Page Better to burn out than it is to rust



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.