Underground air line - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pwdcougar · 04-03-2021, 02:52 PM

I’m planning a pole barn about 45’ away from my existing garage. I’d like to leave my air compressors where they are and put an underground line to the pole barn so I don’t have to listen to them and to save space.

Anyone ever done this? Is it possible?

Thanks

Paul
Posted via Mobile Device

Killer Bee · 04-04-2021, 03:32 AM

pvc should be sufficient but copper would probably be better.. you could even consider burying larger pvc and pulling some 3/4" or 1" flexible tubing thru for serviceability..

burial depth and materials may vary by location so may want to consult with local plumber for advice, code info, etc.. especially if your trenching for any other utilities..

may also want to consider a storage tank in the new building to stabilize temp and air delivery.. of course good FR(L as applicable) and any number of modular plastic quick connect tubing options for distribution manifolds.. various options for mounting couplers..

I even ran full copper distribution in a building once that owner fully polished afterwards

I had this same idea for the farm and I'll probably do it when I trench the ducts for underground power.. good luck!

franken · 04-04-2021, 03:54 AM

Interesting writing style from the previous poster.
PVC rots in sunlight so think if it's exposed at any point. PVC bad. I'd also wonder about where water might collect at low points.

Redneck Rydes · 04-04-2021, 10:07 AM

we have underground line running from the compressor to a inground hoist,been there for 40 years,no problem what so ever

**richard2717** · 04-05-2021, 07:41 AM

Paul
I have a 1" rigid Galv. pipe buried from one garage to my big shop that has been there since 97' without issue. It is roughly 20'. It is probably getting time to dig up and replace though since it is the lowest point in the system

Richard

**mongocanfly** · 04-05-2021, 11:14 AM

I've been considering the same thing from my main shop out to my pole barn..
Gonna be running some 110 out there anyway for lights and plugs, and want to run airline at the same time ..my compressor is under a side shed on the main shop so pole barn is end of the line..
With it running underground it will be the lowest point..I was worried about it turning into a water trap..
So I'll probably add a reservoir tank out there with a condensate drain..and only valve that section in from the shop when needed..

Notch1988 · 04-05-2021, 07:22 PM

I did this at my last shop and it worked great. Buried 2" PVC electrical conduit with LB's at each building, ran a fish tape and pulled an air hose through from one side to the other. This way if there's ever an issue I can just pull a new hose through and good to go.

**mongocanfly** · 04-05-2021, 09:21 PM

Notch, that may be the way I do mine...I could pull my 110v wire and hose at the same time..

pwdcougar · 04-05-2021, 09:21 PM

Thanks everyone! Now all I need to do is build a pole barn garage!

**truckdude239** · 04-25-2021, 03:48 PM

WHAT EVER YOU DO DO NOT USE PVC for air lines pvc when it lets loose will send shapel out

04-03-2021, 02:52 PM	#1
pwdcougar Registered User Join Date: Oct 2013 Location: New Jersey Posts: 1,307	Underground air line I’m planning a pole barn about 45’ away from my existing garage. I’d like to leave my air compressors where they are and put an underground line to the pole barn so I don’t have to listen to them and to save space. Anyone ever done this? Is it possible? Thanks Paul Posted via Mobile Device

04-04-2021, 03:32 AM	#2
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,814	Re: Underground air line pvc should be sufficient but copper would probably be better.. you could even consider burying larger pvc and pulling some 3/4" or 1" flexible tubing thru for serviceability.. burial depth and materials may vary by location so may want to consult with local plumber for advice, code info, etc.. especially if your trenching for any other utilities.. may also want to consider a storage tank in the new building to stabilize temp and air delivery.. of course good FR(L as applicable) and any number of modular plastic quick connect tubing options for distribution manifolds.. various options for mounting couplers.. I even ran full copper distribution in a building once that owner fully polished afterwards I had this same idea for the farm and I'll probably do it when I trench the ducts for underground power.. good luck! __________________ *I started out with nothing - and I still have most of it*

04-04-2021, 03:54 AM	#3
franken Registered User Join Date: Jun 2013 Location: Somewhere Posts: 3,127	Re: Underground air line Interesting writing style from the previous poster. PVC rots in sunlight so think if it's exposed at any point. PVC bad. I'd also wonder about where water might collect at low points.

04-04-2021, 10:07 AM	#4
Redneck Rydes Registered User Join Date: Feb 2016 Location: Trenton,Ontario & South Carolina Posts: 755	Re: Underground air line we have underground line running from the compressor to a inground hoist,been there for 40 years,no problem what so ever

04-05-2021, 07:41 AM	#5
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,135	Re: Underground air line Paul I have a 1" rigid Galv. pipe buried from one garage to my big shop that has been there since 97' without issue. It is roughly 20'. It is probably getting time to dig up and replace though since it is the lowest point in the system Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

04-05-2021, 11:14 AM	#6
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,673	Re: Underground air line I've been considering the same thing from my main shop out to my pole barn.. Gonna be running some 110 out there anyway for lights and plugs, and want to run airline at the same time ..my compressor is under a side shed on the main shop so pole barn is end of the line.. With it running underground it will be the lowest point..I was worried about it turning into a water trap.. So I'll probably add a reservoir tank out there with a condensate drain..and only valve that section in from the shop when needed.. __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

04-05-2021, 07:22 PM	#7
Notch1988 Registered User Join Date: Aug 2009 Location: Lacombe, Alberta Posts: 335	Re: Underground air line I did this at my last shop and it worked great. Buried 2" PVC electrical conduit with LB's at each building, ran a fish tape and pulled an air hose through from one side to the other. This way if there's ever an issue I can just pull a new hose through and good to go. __________________ 66 GMC swb dropmember accuair Link to my build: My GMC Project

04-05-2021, 09:21 PM	#8
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,673	Re: Underground air line Notch, that may be the way I do mine...I could pull my 110v wire and hose at the same time.. __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

04-05-2021, 09:21 PM	#9
pwdcougar Registered User Join Date: Oct 2013 Location: New Jersey Posts: 1,307	Re: Underground air line Thanks everyone! Now all I need to do is build a pole barn garage! __________________ "You know that little thing in your head that keeps you from saying things you shouldn't? Yeah well, I don't have one of those" 1969 Mercury Cougar Standard 4 speed 1969 Mercury Cougar XR7 convertible 1970 4WD Chevrolet Suburban 1997 4WD Chevrolet Silverado Extended Cab Short Bed (purchased new January 1997)

04-25-2021, 03:48 PM	#10
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,238	Re: Underground air line WHAT EVER YOU DO DO NOT USE PVC for air lines pvc when it lets loose will send shapel out __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.