|
04-26-2021, 11:00 PM
|
#1 |
|
Registered User
Join Date: Sep 2020
Location: Osborne
Posts: 16
|
Body Patch Panels
Greetings,
I Have a 72 Chevy C10. Need to repair rusty rockers and cab corners. Have seen "patch" panels at different venders. (LMC, brothers, etc). Haven't looked at AMD yet. Where should I get them at? Want to have decent material to work with. thanks. |
|
|
|
04-27-2021, 07:50 AM
|
#2 |
|
All stock and staying that way
 
Join Date: Jul 2003
Location: Elkland, PA
Posts: 1,845
|
Re: Body Patch Panels
I recommend AMD parts. For an aftermarket part, they seem to fit OK and be stamped from a decent gauge metal. Not sure which parts retailers sell their parts. I would try to support one of our board vendors, such as GMCPaul
__________________
1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion..  1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor...  2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels |
|
|
|
|
04-27-2021, 08:04 AM
|
#3 |
|
Senior Member
Join Date: Dec 2013
Location: Gods country East,Tn
Posts: 8,545
|
Re: Body Patch Panels
Here's the replacement parts from AMD sold thru Summit For 1972 C-10 Use Summit for their fast /free/discounted shipping and great customer service , They also price match if you find a part at a lower price somewhere else .
 https://www.summitracing.com/search/...metal%20direct
__________________
 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop |
|
|
|
|
04-27-2021, 08:43 AM
|
#4 |
|
Registered User
Join Date: Jan 2000
Location: Wyoming USA
Posts: 2,451
|
Re: Body Patch Panels
I just went this route for my 63 C-10 and ordered 2 AMD fenders pass. side fit great but the drvs. side was garbage . They advertise AMD but it came as TRIPLUS so IDK maybe the same company ?? Summit did take it back I lost a little $ but I was going to accept a part that was that far off. I did research for days and it sounds like they are all made in China, Taiwan etc. Dont think it matters much I looked at the local vendors here (forum)and shipping was as much as the fender. Good Luck
__________________
2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327 |
|
|
|
|
04-27-2021, 05:08 PM
|
#5 |
|
Registered User
 
Join Date: Jan 2011
Location: Chattanooga TN
Posts: 6,214
|
Re: Body Patch Panels
Key Parts. Order through GMCPauls.
__________________
Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 *Currently underway* 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet *Sold* 1985 Silverado Short Fleet *Sold* 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride) |
|
|
|
|
04-28-2021, 02:12 AM
|
#6 |
|
Senior Member
Join Date: Dec 1999
Location: Southern California
Posts: 2,889
|
Re: Body Patch Panels
Most of my patch panels came from Wes @ Classic Heartbeat. Purchased some time ago. Seemed to fit fine. The older panel I had needed some work. I only used partials though. Shipping is getting expensive through the forum vendors. Summit is great for some parts on shipping. Though they seem to be adding an over size charge to many parts now. My inner grill showed up in a day, fit great. Free shipping. Also got 4 wheels from them, very fast and free shipping. Unfortunately shipping costs are going up. Large items will cost $. Classic Parts is another one I frequently purchase from.
__________________
Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746 |
|
|
|
|
04-28-2021, 10:16 AM
|
#7 | |
|
Registered User
Join Date: Nov 2019
Location: Eagle River Alaska
Posts: 320
|
Re: Body Patch Panels
Quote:
I just completed this job on both sides of my truck. I did a full write up on it in this forum. I used all patch panels from RAYBUCK. They all fit almost perfect with very little modifications. Good luck with this project |
|
|
|
|
 |
| Bookmarks |
| Tags |
| body panels |
|
|
Linear Mode
