69 Fuel Lines

[gt40racing]

Originally Posted by Jason Banks

I used these to attach to the tubing:
https://www.summitracing.com/parts/sum-2200075b
https://www.summitracing.com/parts/sum-2200077b

Using the above will not require a 37° flaring tool, which is not common.

I bought a flaring tool for some reason, thinking I was going to use the tube nut/sleeve combo like these:
https://www.summitracing.com/parts/sum-220633-2b
https://www.summitracing.com/parts/sum-220634-2b

With the tube nut and sleeve, you put the nut then sleeve on the tube and flare the tubing and you can then connect to a male AN fitting.

I picked up a Rigid 37° flaring tool when I was working on my F-1. Great tool for this application.