Buckets to bench - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CG · 06-27-2021, 01:18 PM

I feel like it’s an obvious answer but since I don’t have my seat here to check …
The open holes in the cab floor are for buckets. Are the large philip head screws in the correct mounting holes for bench?

**Accelo** · 06-27-2021, 01:29 PM

If you have the extra supports underneath you are correct. I wouldn't expect the holes to be plugged with the correct screws unless it was a factory bucket seat truck.

CG · 06-27-2021, 01:33 PM

It is a factory bucket seat truck. Im putting a bench in.

I remember seeing thread where folks are putting buckets in a former bench truck but its not so obvious where the correct bucket mounting holes would be.

**Accelo** · 06-27-2021, 01:38 PM

Quote:

Originally Posted by CG

It is a factory bucket seat truck. Im putting a bench in.

I remember seeing thread where folks are putting buckets in a former bench truck but its not so obvious where the correct bucket mounting holes would be.

Bucket trucks had both sets of holes. Bench trucks didn't. So you are good. Just move the large Phillips Screws to the old holes and install the bench seat. 100 times easier than going the other way.

06-27-2021, 01:18 PM	#1
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,962	Buckets to bench I feel like it’s an obvious answer but since I don’t have my seat here to check … The open holes in the cab floor are for buckets. Are the large philip head screws in the correct mounting holes for bench? Attached Images __________________ … … … … … … … … ... … … … … … … … … … … …

06-27-2021, 01:29 PM	#2
Accelo Senior Member Join Date: Mar 2015 Location: washington Posts: 2,269	Re: Buckets to bench If you have the extra supports underneath you are correct. I wouldn't expect the holes to be plugged with the correct screws unless it was a factory bucket seat truck.

06-27-2021, 01:33 PM	#3
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,962	Re: Buckets to bench It is a factory bucket seat truck. Im putting a bench in. I remember seeing thread where folks are putting buckets in a former bench truck but its not so obvious where the correct bucket mounting holes would be. __________________ … … … … … … … … ... … … … … … … … … … … …



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.