Will these '05 GMC 3/4 rims fit a '70 c20 chev?

[darkone]

just wondering if these will fit on a 1970 chev c20. both are 8 lug pattern.also, will these fit with low pro tires on a stock height c20?

[Blazer1970]

They will bolt on to the truck just fine. The fit depends on what size wheel and tire you are talking about.

[Longhorn Man]

You'll probably have issues with how wide they are, the back spacing is too much and the wheel/tire may rub when you turn the wheel.

[darkone]

thanks for the info ^^ guys. can anyone else give me any more info on rubber that will work with these? again ive got a stock height, all new suspension, 3/4 ton 70 stepside

[treveiger]

Not to steal the thread but so lets say i could take the rims off my fathers 05 Dmax and theyll fit on my truck??? Ive threatend it several times but i dont think he believes me.

[capev86]

lug pattern is the same, but modern trucks have a different thread size so don't try to use the lugs from the donor unless you change your studs.

[05crewcab]

Factory Dmax wheels fit just fine but they are inset a tad for most of our liking. I have them on mine, but want to change to something else that fills the wheel wells better.

Darkone, we need the diameter, width and backspace number on those aftermarket wheels above to determine if they will work.

[darkone]

thisis what i found for the same wheels at 18"



Size Bolt Pattern Offset Back Space Hub Bore
18 x 10 8x165 -24 mm 4.56" 130.8 mm
18 x 10 8x170 -24 mm 4.56" 130.8 mm
18 x 8.5 8x165 +12 mm 5.22" 130.8 mm
18 x 8.5 8x170 +12 mm 5.22" 130.8 mm

[bob arrington]

the front fit fine on mine, and I didnt have to but I added a 1 1/2" spacer on each side of the rear to bring them out and fill the rear wheel wells, btw mine were old 2004 american racing 20's.
it changed the rear gear ratio also, its more highway friendly now even with the granny gear 4 speed...lol