![]() |
![]() |
#1 |
Registered User
Join Date: Jul 2012
Location: Whitehorse yukon
Posts: 1,218
|
Picked up 72 c20
Picked up a 72 c20 yesterday fair shape for an old truck usual rocker and cab corner issues.
Going to put a starter in it today see how it runs I may put a different 350 in it depends on how well it runs Thinking clr the body and clear coat it I have a good windshield in a parts truck to swap over have to see if the rubber is still soft this trucks rubber is hard so i will not re use is |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2012
Location: Whitehorse yukon
Posts: 1,218
|
Re: Picked up 72 c20
Looking at POL as they offer new Hd springs thinking about new springs when I redo the front end ball joints tie rods
I might put a ls in it latter, today I want a driving truck with minimal fuss The one thing i don't like is the eaton rear end there goes getting a posi for it I have no idea yet what gear ratio is other then guessing 4.10 I do have a 4.57 and a 4.10 eaton locker in other trucks dependant on shape of the drums before I order parts for the eaton Are C10 and C20 Truck arms the same ? I may look at what it will take to put a 14 bolt in it I remember someone talked about it on here i have not found that thread |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2020
Location: Albuquerque, New Mexico
Posts: 475
|
Re: Picked up 72 c20
Nice score and I like the options.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Sep 2011
Location: Ark City, Kansas
Posts: 3,319
|
Re: Picked up 72 c20
Wow!!! Nice!!!
Surprised me that it was an automatic!!! Thankfully it's a 72 (disc brakes!!!) My education on windshield install/removals: Never try to save/remove a good windshield AND the gasket. I've saved several windshields and gaskets, it doesn't always work out....... Installing a good windshield with an old gasket can be attempted, carefully, BUT new gaskets are NOT that expensive!!! |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jul 2012
Location: Whitehorse yukon
Posts: 1,218
|
Re: Picked up 72 c20
I am cutting it out that one is soft unfortunately i have to check my trash parts cabs see what there like if not order one asap
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jul 2012
Location: Whitehorse yukon
Posts: 1,218
|
Re: Picked up 72 c20
As for the automatic I am guessing its a t350 as the truck is low hump
I have not climbed under yet and gave it a hard look I have been collecting parts to build an automatic truck over the last year had several complications with my broken leg so not popping the clutch in Friday traffic is my goal |
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Dec 2014
Location: Edmonton Alberta
Posts: 1,321
|
Re: Picked up 72 c20
Are C10 and C20 Truck arms the same ? Trailing arms? The C20 ones are different, although if you can weld you can make C10 ones into C20s, I think. Nice score, that tailgate looks nice and straight for a working man's truck.
__________________
DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10 |
![]() |
![]() |
![]() |
#8 |
Born To Lose Club
![]() Join Date: Feb 2003
Location: Calgary, Alberta/Oxenden, Ontario, Great White North
Posts: 13,306
|
Re: Picked up 72 c20
![]()
__________________
Brian Smith ![]() 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154. |
![]() |
![]() |
![]() |
#9 |
Senior Member
![]() Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,365
|
Re: Picked up 72 c20
Good deal
![]() ![]()
__________________
A husband can be right...or...A husband can be happy. ![]() 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. ![]() 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc ![]() ![]() JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! |
![]() |
![]() |
![]() |
#10 | |
Active Member
![]() Join Date: Jan 2016
Location: Albertville, MN
Posts: 186
|
Re: Picked up 72 c20
Quote:
__________________
![]() |
|
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Jul 2012
Location: Whitehorse yukon
Posts: 1,218
|
Re: Picked up 72 c20
Two Low cylinders at 130 the rest between 140 and 150 psi going to put new plugs and a hei dizzy in it tomorrow no spark out of the old points and coil not going to play with them either
|
![]() |
![]() |
![]() |
#12 |
Active Member
![]() Join Date: Jan 2016
Location: Albertville, MN
Posts: 186
|
Re: Picked up 72 c20
I responded to your DM about the hubcap. I went to send you a message about the steering wheel but it says your box is full. If that steering wheel is in good condition and the truck is a 505 Green, I'd love to buy that steering wheel if I could. Let me know. Thanks!!
__________________
![]() |
![]() |
![]() |
![]() |
#13 |
Born To Lose Club
![]() Join Date: Feb 2003
Location: Calgary, Alberta/Oxenden, Ontario, Great White North
Posts: 13,306
|
Re: Picked up 72 c20
If you end up switching out that rear bumper let me know. I'd be interested in taking it off your hands.
__________________
Brian Smith ![]() 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154. |
![]() |
![]() |
![]() |
#14 |
Senior Member
![]() Join Date: Aug 2019
Location: Cheraw
Posts: 1,305
|
Re: Picked up 72 c20
If you want to know which trans you have look at the carb and see if you have a jerk cable. 400 had an electrical switch, 350 have a jerk cable.
|
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Jul 2012
Location: Whitehorse yukon
Posts: 1,218
|
Re: Picked up 72 c20
Thanks its a t350 i was under it the other day.
I figured t350 not t400 over it having a low hump |
![]() |
![]() |
![]() |
#16 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,862
|
Re: Picked up 72 c20
Nice truck. I like how it was optioned down to the color. Someone knew what they wanted and didn't want. Too bad they didn't get a No Spin. I bet it was a camper hauler or fishing rig. A no frills one. I think it's funny people wanting to pick parts off of it.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Jul 2012
Location: Whitehorse yukon
Posts: 1,218
|
Re: Picked up 72 c20
Lol my mom calls it a rusty pos my cousin thinks I am chopping it
My parts ordered say I am going to drive it soon I hope I hope my brakelines show up next week all new steering gear came in the other day Still debating ordering new springs before I put the new ball joints in Going to try and fire it up this weekend new plugs and hei dizzy Already swapped wheels off my donor van on it get rid of the rusty split rims |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Jul 2012
Location: Whitehorse yukon
Posts: 1,218
|
Re: Picked up 72 c20
I have a 4.57 and a 4.10 locker I can put in. on a street truck I prefer a posi
The Detroit bang bang can be loud and unsettling to your passengers on a bit of sprited cornering I was hoping for a dana 60 rear in it as I can find a posi for a 60 easily |
![]() |
![]() |
![]() |
#19 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,862
|
Re: Picked up 72 c20
I'd like to find a stock C/20 just to enjoy as it was meant to be.
I've had great experience with No Spins on the street. I read the complaints but none were issues in my experience. I like them less off road because sometimes you just don't want that other wheel engaged. A light touch when pulling a hard right from a stop going uphill works for me. I never had tire wear issues either.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Feb 2007
Location: west coast
Posts: 3,363
|
Re: Picked up 72 c20
Right! Here is another example in red from back in the day. Painted bumpers, wheels, hubcaps, mirrors all have a way of disappearing , IMO, their individual character is destroyed, and they all begin to look the same.
|
![]() |
![]() |
![]() |
#21 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,862
|
Re: Picked up 72 c20
I had a parts truck that was a '69 C/20 Stepside in Dark Green, pure stock but not a lot left. It had a 396 w/4spd and No-Spin and all the HD options. It had the 8.25" wheels all around. It wasn't a Custom Camper but it had the camper wiring, mirrors, and slider options
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
Bookmarks |
|
|