|
07-21-2021, 03:40 PM | #1 |
Registered User
Join Date: Jun 2012
Location: Schoolcraft, Michigan
Posts: 927
|
Re: Budget Build 1985 K20
I have started to feel better lately and can kind of get around with out the use of crutches so i have been trying to tackle some smaller projects that i can work on sitting down.
I rebuilt the hyrdobooster i got from a local pick and pull and fixed a EGT probe hole in the headers i plan on using.
__________________
1972 GMC Jimmy 4x4 LS Swap 1985 Chevy K20 1994 GMC Yukon 2021 GMC 2500HD Duramax AT4 My "It's a Jimmy Thing" Build http://67-72chevytrucks.com/vboard/s...d.php?t=583528 Budget Build 1985 K20 http://67-72chevytrucks.com/vboard/s...d.php?t=801565 |
07-21-2021, 03:44 PM | #2 |
Registered User
Join Date: Jun 2012
Location: Schoolcraft, Michigan
Posts: 927
|
Re: Budget Build 1985 K20
I also started rebuilding my vent windows. The first task was to weld the pivot stud back on.
__________________
1972 GMC Jimmy 4x4 LS Swap 1985 Chevy K20 1994 GMC Yukon 2021 GMC 2500HD Duramax AT4 My "It's a Jimmy Thing" Build http://67-72chevytrucks.com/vboard/s...d.php?t=583528 Budget Build 1985 K20 http://67-72chevytrucks.com/vboard/s...d.php?t=801565 |
07-21-2021, 05:39 PM | #3 |
Registered User
Join Date: Jan 2006
Location: Clinton, tn
Posts: 177
|
Re: Budget Build 1985 K20
I just found this thread, great work! I hope your achilles tendon heals fast. subscribed .
|
07-23-2021, 02:16 PM | #4 |
Registered User
Join Date: Jun 2012
Location: Schoolcraft, Michigan
Posts: 927
|
Re: Budget Build 1985 K20
Thanks! I have been watching your build and that is impressive!
__________________
1972 GMC Jimmy 4x4 LS Swap 1985 Chevy K20 1994 GMC Yukon 2021 GMC 2500HD Duramax AT4 My "It's a Jimmy Thing" Build http://67-72chevytrucks.com/vboard/s...d.php?t=583528 Budget Build 1985 K20 http://67-72chevytrucks.com/vboard/s...d.php?t=801565 |
07-23-2021, 02:21 PM | #5 |
Registered User
Join Date: Jun 2012
Location: Schoolcraft, Michigan
Posts: 927
|
Re: Budget Build 1985 K20
Well to keep the theme of doing stuff I can sit a a bench and do...... I built the X Pipe for my exhaust. I plan on running 2 1/2" stainless steel exhaust like on my Jimmy but on the Jimmy there was not room for an X pipe so it got a H pipe. Actually working the foot pedal of my welding machine is good PT for my ankle.
__________________
1972 GMC Jimmy 4x4 LS Swap 1985 Chevy K20 1994 GMC Yukon 2021 GMC 2500HD Duramax AT4 My "It's a Jimmy Thing" Build http://67-72chevytrucks.com/vboard/s...d.php?t=583528 Budget Build 1985 K20 http://67-72chevytrucks.com/vboard/s...d.php?t=801565 |
07-23-2021, 03:09 PM | #6 |
Registered User
Join Date: Jan 2006
Location: Clinton, tn
Posts: 177
|
Re: Budget Build 1985 K20
Nice work man, I wish I'd made my own x-pipe, I already had the one I used just to save a dime. but now it kinda looks out of place next to the mandrel 3" tubing. Did you use a bandsaw to get your cuts or free hand ?
|
07-23-2021, 10:14 PM | #7 |
Registered User
Join Date: Jun 2012
Location: Schoolcraft, Michigan
Posts: 927
|
Re: Budget Build 1985 K20
No bandsaw. I just measured some points out on the heel of both elbows and connected the dots and went to town with a cutoff wheel on my grinder. I then just cleaned the cuts up with a sanding disk and made sure it sit flat on my bench. They actually fit together really well and I purge welded them so they didn’t sugar the inside.
__________________
1972 GMC Jimmy 4x4 LS Swap 1985 Chevy K20 1994 GMC Yukon 2021 GMC 2500HD Duramax AT4 My "It's a Jimmy Thing" Build http://67-72chevytrucks.com/vboard/s...d.php?t=583528 Budget Build 1985 K20 http://67-72chevytrucks.com/vboard/s...d.php?t=801565 |
07-23-2021, 03:17 PM | #8 |
Registered User
Join Date: Jan 2006
Location: Clinton, tn
Posts: 177
|
Re: Budget Build 1985 K20
|
Bookmarks |
|
|