WTB - manual tilt column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Burnsman · 07-16-2004, 12:50 PM

Looking for a manual trans tilt column. Thanks. Brian

stelth2002 · 07-16-2004, 01:03 PM

Ive been looking for one for a while, im not sure if they even made them did they?

Harold Shepard · 07-16-2004, 01:07 PM

they did make them but good luck finding one. Saw one at Charlotte Auto fair several years ago and they wanted big$$$ for the thing. Don't remember who had it, but they had several rebuilt columns. You might try looking in Hemmings and see what is listed in services.

71swb4x4 · 07-16-2004, 01:14 PM

I had one, but I sold it to some Brian guy last winter

Burnsman · 07-16-2004, 01:35 PM

I know. Thanks 71

. I am looking for one more. I have bid on 4 in the last 3 months on ebay and lost every single one. A few went for too much $. The other ones I lost becuase I'm not a smart ebayer.

stelth2002 · 07-16-2004, 03:34 PM

Curious, what do they go for on ebay and Brian you should identify yourself so we dont bid against each other for something like that.

Burnsman · 07-16-2004, 03:49 PM

My ebay name is burnsman. I missed the one at like $260. I think another was around $280. The other two were in the $330-$350 range. I put a limit of $300 (or there-abouts). I don't mind paying a good buck for something I want, but some people are insane!

68c10owner · 07-16-2004, 07:10 PM

there is a parts company selling rebuilt ones. i think the name is golden state or something like that. they are in carson city nevada. i can`t remeber the price but i want to say it was around $300-$350.

PunkRock247 · 07-16-2004, 08:13 PM

Maybe check here:

http://www.parts123.com/PartFrame.as...EN_STATE_PARTS
Search for Part No: 3-229S

Burnsman · 07-16-2004, 10:40 PM

Thanks! Anyone ever use any of the aftermarket tilts?

gonebad2 · 07-16-2004, 11:29 PM

I got one from The Truck Shop in Orange Ca for around $300.00. It was totally rebuilt with new bearings, harness and cancelling cam. It has a short shaft like the original so it bolted right in. I'm really pleased with it.

Deuce · 07-16-2004, 11:57 PM

A truck I looked at had a tilt out of a Nova or something like that. Looked kinda weird though.

MOTHERTRUCKERS · 07-17-2004, 05:26 AM

We use and sell the IDIDIT manual tilt steel column made for the 67-72 chevy-gmc truck, it's a direct bolt in installiation and comes with the lever dress up kit and correct harness. It is a very smooth operating tilt for around 340.00 with shipping

07-16-2004, 12:50 PM	#1
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	WTB - manual tilt column Looking for a manual trans tilt column. Thanks. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

07-16-2004, 01:03 PM	#2
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Ive been looking for one for a while, im not sure if they even made them did they? __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

07-16-2004, 01:07 PM	#3
Harold Shepard Registered User Join Date: May 2004 Location: Canton North Carolina Posts: 466	tilt column they did make them but good luck finding one. Saw one at Charlotte Auto fair several years ago and they wanted big$$$ for the thing. Don't remember who had it, but they had several rebuilt columns. You might try looking in Hemmings and see what is listed in services.

07-16-2004, 01:14 PM	#4
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	I had one, but I sold it to some Brian guy last winter __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

07-16-2004, 01:35 PM	#5
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	tilt I know. Thanks 71 . I am looking for one more. I have bid on 4 in the last 3 months on ebay and lost every single one. A few went for too much $. The other ones I lost becuase I'm not a smart ebayer. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

07-16-2004, 03:34 PM	#6
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Curious, what do they go for on ebay and Brian you should identify yourself so we dont bid against each other for something like that. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

07-16-2004, 03:49 PM	#7
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	tilt column My ebay name is burnsman. I missed the one at like $260. I think another was around $280. The other two were in the $330-$350 range. I put a limit of $300 (or there-abouts). I don't mind paying a good buck for something I want, but some people are insane! __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

07-16-2004, 07:10 PM	#8
68c10owner Registered User Join Date: Oct 2003 Location: Carmichael, California Posts: 3,006	there is a parts company selling rebuilt ones. i think the name is golden state or something like that. they are in carson city nevada. i can`t remeber the price but i want to say it was around $300-$350. __________________ Anthony

07-16-2004, 08:13 PM	#9
PunkRock247 Registered User Join Date: Dec 2002 Location: Antelope, CA Posts: 44	Maybe check here: http://www.parts123.com/PartFrame.as...EN_STATE_PARTS Search for Part No: 3-229S

07-16-2004, 10:40 PM	#10
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	tilt Thanks! Anyone ever use any of the aftermarket tilts? __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

07-16-2004, 11:29 PM	#11
gonebad2 Merciless Butcher Join Date: Oct 2003 Location: CC Nevada Posts: 1,447	I got one from The Truck Shop in Orange Ca for around $300.00. It was totally rebuilt with new bearings, harness and cancelling cam. It has a short shaft like the original so it bolted right in. I'm really pleased with it. __________________ Your Bought And Sold....I Got Your Soul!

07-16-2004, 11:57 PM	#12
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	A truck I looked at had a tilt out of a Nova or something like that. Looked kinda weird though. __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

07-17-2004, 05:26 AM	#13
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	We use and sell the IDIDIT manual tilt steel column made for the 67-72 chevy-gmc truck, it's a direct bolt in installiation and comes with the lever dress up kit and correct harness. It is a very smooth operating tilt for around 340.00 with shipping __________________ Rest in Peace Ed. Thanks for all the good times.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.