CO WTB - Frame cuts and crossmember - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Austinjay** · 09-07-2021, 10:30 AM

Looking for the front frame horns for a 1971 c10 (although i think what i need can come from any 67-72 frame). I only need from the core support forward. I also need the front crossmember that sits under the fan/core support. Let me know what you have. Thank you

**Jeff's bowtie's** · 09-07-2021, 11:12 AM

I have a nice pair of frame horns off a 72 C/10 with nice radiator supports still on them $50.00 shipped plus fees if interested I can post pics thanks

**Austinjay** · 09-07-2021, 11:17 AM

Quote:

Originally Posted by Jeff's bowtie's

I have a nice pair of frame horns off a 72 C/10 with nice radiator supports still on them $50.00 shipped plus fees if interested I can post pics thanks

interested. Can you send me pictures when you get a chance. No rush

**Jeff's bowtie's** · 09-07-2021, 11:38 AM

Here’s pics of the ones I have (bumper brackets are not included) no pitting and very nice radiator core support brackets let me know thanks

**Jeff's bowtie's** · 09-07-2021, 11:41 AM

Quote:

Originally Posted by Austinjay

interested. Can you send me pictures when you get a chance. No rush

Nice truck in your avatar!! Here’s a pic of my 71

**michael bustamante** · 09-07-2021, 01:24 PM

i have a complete rolling chassis if youre interested. 72 frame but not a 4x4

**1rippen6** · 09-07-2021, 04:31 PM

I have the front crossmember, I can get you a picture tomorrow.

**Austinjay** · 09-07-2021, 05:02 PM

Quote:

Originally Posted by michael bustamante

i have a complete rolling chassis if youre interested. 72 frame but not a 4x4

Thank you for the offer but i just need the few small parts.

BigBird05 · 09-07-2021, 05:02 PM

If you have a damaged front crossmember and you need frame horns are you sure that the frame is straight? You might want to take some X measurements to make sure everything is ok. An X measurement is where you take a measurement from one side to the other side. In the shape of an x. Make sure that you use the same holes and measure it exactly in the same place.

**Austinjay** · 09-07-2021, 05:05 PM

Quote:

Originally Posted by 1rippen6

I have the front crossmember, I can get you a picture tomorrow.

Ok thank you.

**Austinjay** · 09-07-2021, 05:09 PM

Quote:

Originally Posted by BigBird05

If you have a damaged front crossmember and you need frame horns are you sure that the frame is straight? You might want to take some X measurements to make sure everything is ok. An X measurement is where you take a measurement from one side to the other side. In the shape of an x. Make sure that you use the same holes and measure it exactly in the same place.

Its straight, Im a fabricator by trade so im pretty good with metal lol. Good advice for the newbies though.

**Austinjay** · 09-07-2021, 06:07 PM

Quote:

Originally Posted by Jeff's bowtie's

Nice truck in your avatar!! Here’s a pic of my 71

Hell ya!!! Nice truck!

Madkidd007 · 09-07-2021, 06:12 PM

If you don’t get what you need from the previous posts, I have everything you need.

**1rippen6** · 09-07-2021, 06:57 PM

PM sent

**Austinjay** · 09-10-2021, 05:05 PM

Thank you for all the help, i have gotten what i need.

09-07-2021, 10:30 AM	#1
Austinjay Senior Member Join Date: Nov 2014 Location: Brighton, Colorado Posts: 347	WTB - Frame cuts and crossmember Looking for the front frame horns for a 1971 c10 (although i think what i need can come from any 67-72 frame). I only need from the core support forward. I also need the front crossmember that sits under the fan/core support. Let me know what you have. Thank you __________________ '72 K20 Ochre/white 350/350/205 4" Lift 35's '72 GMC K10 red orange/white 400/350/205 '69 C20 Longhorn 454 TH400 '72 Blazer CST 4x4 '70 Blazer 4X4

09-07-2021, 11:12 AM	#2
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,938	Re: WTB - Frame cuts and crossmember I have a nice pair of frame horns off a 72 C/10 with nice radiator supports still on them $50.00 shipped plus fees if interested I can post pics thanks

09-07-2021, 11:38 AM	#4
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,938	Re: WTB - Frame cuts and crossmember Here’s pics of the ones I have (bumper brackets are not included) no pitting and very nice radiator core support brackets let me know thanks Attached Images

09-07-2021, 01:24 PM	#6
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: WTB - Frame cuts and crossmember i have a complete rolling chassis if youre interested. 72 frame but not a 4x4 __________________ 1967custom

09-07-2021, 04:31 PM	#7
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,725	Re: WTB - Frame cuts and crossmember I have the front crossmember, I can get you a picture tomorrow.

09-07-2021, 05:02 PM	#9
BigBird05 Registered User Join Date: Aug 2019 Location: Cheraw Posts: 1,305	Re: WTB - Frame cuts and crossmember If you have a damaged front crossmember and you need frame horns are you sure that the frame is straight? You might want to take some X measurements to make sure everything is ok. An X measurement is where you take a measurement from one side to the other side. In the shape of an x. Make sure that you use the same holes and measure it exactly in the same place.

09-07-2021, 06:12 PM	#13
Madkidd007 Registered User Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,234	Re: WTB - Frame cuts and crossmember If you don’t get what you need from the previous posts, I have everything you need. Attached Images __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

09-07-2021, 06:57 PM	#14
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,725	Re: WTB - Frame cuts and crossmember PM sent

09-10-2021, 05:05 PM	#15
Austinjay Senior Member Join Date: Nov 2014 Location: Brighton, Colorado Posts: 347	Re: WTB - Frame cuts and crossmember Thank you for all the help, i have gotten what i need. __________________ '72 K20 Ochre/white 350/350/205 4" Lift 35's '72 GMC K10 red orange/white 400/350/205 '69 C20 Longhorn 454 TH400 '72 Blazer CST 4x4 '70 Blazer 4X4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.