How do I remove the brake light switch? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bouncytruck · 07-20-2004, 11:53 AM

There is an access hole in the top of the pedal assembly on the drivers side of the brake light switch. I just pulled mine the other day. I was able to get a wrench on the cheap nut and hold the switch with my other hand. Just enought room to move the wrench enought to break it loose. You can then turn it buy had.

FYI- I'm 6'3" and 240, so I understand your pain! It wasn't easy, putting it back in was much easier. I left the lower nut in place so I didn't have to do a bunch of adjusting when I put it back in.

07-20-2004, 11:53 AM	#7
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	There is an access hole in the top of the pedal assembly on the drivers side of the brake light switch. I just pulled mine the other day. I was able to get a wrench on the cheap nut and hold the switch with my other hand. Just enought room to move the wrench enought to break it loose. You can then turn it buy had. FYI- I'm 6'3" and 240, so I understand your pain! It wasn't easy, putting it back in was much easier. I left the lower nut in place so I didn't have to do a bunch of adjusting when I put it back in. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.