Anyone use the headlight relay wire harness from LMC

[seattle gmc]

Originally Posted by Irishbleueyes

Sure, my problem was the wires going into the plug on the harness sent from LMC. They were in the wrong location, so I switched them around till it worked. I don't remember which color goes to which tab on the headlight but it was easy to figure out. My lights are pure white and it makes a difference on the road as well. If you can't get it let me know and I will go look at where they go for you.

Thanks for the reply im going to look at it this weekend. Were the wires on the wrong tab on the connector that plugs into the existing wire harness, or was it one of the connectors further down the line that plug into the one of the headlights?

[Irishbleueyes]

Originally Posted by seattle gmc

Thanks for the reply im going to look at it this weekend. Were the wires on the wrong tab on the connector that plugs into the existing wire harness, or was it one of the connectors further down the line that plug into the one of the headlights?

Just the connectors at the headlight only

[LostMy65]

Is there a better brand/kit than LMC?

[cwcarpenter98]

Originally Posted by LostMy65

Is there a better brand/kit than LMC?

I used the United Pacific harness purchased through Summit Racing. Looked to be a quality product, and it worked great. Made my old sealed beams bright enough that I don't feel the need to upgrade any further at the moment.

Edit: Sorry, just noticed that this is for the 4 lamp one. Not sure what is out there for that, but if United Pacific makes one for that application, I wouldn't hesitate to buy a product from them again.

[LostMy65]

Thanks, I'll check it out.

[The Rocknrod]

Originally Posted by LostMy65

Here is a thread that might be helpful.
http://67-72chevytrucks.com/vboard/s...d.php?t=397695

That thread is great I built my own harness after reading that.

[sKnNyPpY]

The green and brown wires at the low beam triple prong plugs need to be switched to the same order as the old plug. Brown goes on top and green on the side. Carefully pry them out with a small flat head screwdriver and switch them on each plug. Thanks to this thread I figured it out.

[pdxhall]

Originally Posted by LostMy65

Is there a better brand/kit than LMC?

In my opinion, anything BUT LMC would be better. I bought my relay kit from AAW. It's just the 2 headlight system. I have quit buying from LMC. I had a couple of situations before I learned my lesson. It seems they have no quality control.