CA WTB - Manual Floor Shift Column Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pjmoreland** · 11-11-2021, 01:30 PM

I'm looking for the following four parts from a manual non-tilt floor shift steering column:

1) Bowl with no shifter lever attachment

2) Curved blanking plate that covers the opening at the bottom end of the column housing where the shift linkage arm on an automatic column sticks out

3) Metal turn signal switch housing that sits between the bowl and steering wheel with no screw holes for a shift indicator

4) Plastic bushing that sits on top of the bowl

**Classic Bowties** · 11-11-2021, 01:43 PM

We have both parts pulled/ready to ship, would do $35. on the column bowl/bell and $15. on the lower tin cover, + ship. Can get you some pics this morning if interested, Mel

**pjmoreland** · 11-11-2021, 01:45 PM

Yep, sounds great. Please send photos when convenient. Thanks!

**Classic Bowties** · 11-11-2021, 02:46 PM

Quote:

Originally Posted by pjmoreland

Yep, sounds great. Please send photos when convenient. Thanks!

Here are some pics of the non tilt 4 speed manual/floor shift steering column bowl/bell and the lower tin cover. Mel

.

**pjmoreland** · 11-11-2021, 02:49 PM

Thanks for posting the photos. Is the upper/larger rim of the bowl circular? It's hard to tell from the second photo, but it looks like it might be a little distorted maybe from some prying.

**pjmoreland** · 11-11-2021, 03:55 PM

Also, do you by any chance have the turn signal housing from this column as well? It would not have the two mounting screw holes found on an automatic column for the gear indicator.

**pjmoreland** · 11-11-2021, 06:37 PM

I've added a couple of other parts I'll need as well

**Classic Bowties** · 11-11-2021, 10:29 PM

Okay round two.. this non tilt 4 speed manual/floor shift steering column bowl is in better shape along with the added upper switch housing cover from the same steering column. You have added parts twice since I had last checked into thread so didn't see last request before getting these pics but we can also supply that upper bushing. We will combine ship all of the below listed for $11.75 sent via USPS to CA. 95603. Thanks, Mel

$35. / Non tilt floor shift column bowl/bell
$20. / Non-tilt floor shift upper switch cover
$15. / Non-tilt floor shift lower block off cover
$10. / Non-tilt floor shift upper bowl bushing
.

**pjmoreland** · 11-11-2021, 10:33 PM

The parts look great. Send me your PayPal info, and I'll send over payment for the four parts and shipping. Thanks!

**pjmoreland** · 11-11-2021, 10:52 PM

Payment sent

**Classic Bowties** · 11-13-2021, 12:06 AM

Quote:

Originally Posted by pjmoreland

Payment sent

Hello, your OE 4 speed/manual steering column parts have been shipped off, the package went out via USPS priority on Fri. 11/12 and your expected delivery day is Mon. 11/15. Thanks again for your order and let me know if we can help with any other 67-72 parts needs, Mel

Also, we went ahead and took a couple pics of the added non-tilt upper bowl bushing that was shipped.
.

**pjmoreland** · 11-13-2021, 12:09 AM

Thank you.

**pjmoreland** · 11-18-2021, 04:10 PM

The parts arrived safe and sound. They were very nicely packaged. Thank you, Mel!

Trial assembly of parts can be seen here:

https://67-72chevytrucks.com/vboard/...97#post8997297

11-11-2021, 01:30 PM	#1
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,010	WTB - Manual Floor Shift Column Parts I'm looking for the following four parts from a manual non-tilt floor shift steering column: 1) Bowl with no shifter lever attachment 2) Curved blanking plate that covers the opening at the bottom end of the column housing where the shift linkage arm on an automatic column sticks out 3) Metal turn signal switch housing that sits between the bowl and steering wheel with no screw holes for a shift indicator 4) Plastic bushing that sits on top of the bowl Attached Images Last edited by pjmoreland; 11-11-2021 at 06:37 PM.

11-11-2021, 01:43 PM	#2
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,764	Re: WTB - Manual Floor Shift Column Parts We have both parts pulled/ready to ship, would do $35. on the column bowl/bell and $15. on the lower tin cover, + ship. Can get you some pics this morning if interested, Mel __________________ *For any return/past customers & friends* Before sending of any funds, please wait for a confirmed total and instructions for sending as our payment account info has been changed as of Jan. 2023. Thanks...

11-11-2021, 01:45 PM	#3
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,010	Re: WTB - Manual Floor Shift Column Parts Yep, sounds great. Please send photos when convenient. Thanks!

11-11-2021, 02:49 PM	#5
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,010	Re: WTB - Manual Floor Shift Column Parts Thanks for posting the photos. Is the upper/larger rim of the bowl circular? It's hard to tell from the second photo, but it looks like it might be a little distorted maybe from some prying.

11-11-2021, 03:55 PM	#6
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,010	Re: WTB - Manual Floor Shift Column Parts Also, do you by any chance have the turn signal housing from this column as well? It would not have the two mounting screw holes found on an automatic column for the gear indicator.

11-11-2021, 06:37 PM	#7
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,010	Re: WTB - Manual Floor Shift Column Parts I've added a couple of other parts I'll need as well

11-11-2021, 10:29 PM	#8
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,764	Re: WTB - Manual Floor Shift Column Parts Okay round two.. this non tilt 4 speed manual/floor shift steering column bowl is in better shape along with the added upper switch housing cover from the same steering column. You have added parts twice since I had last checked into thread so didn't see last request before getting these pics but we can also supply that upper bushing. We will combine ship all of the below listed for $11.75 sent via USPS to CA. 95603. Thanks, Mel $35. / Non tilt floor shift column bowl/bell $20. / Non-tilt floor shift upper switch cover $15. / Non-tilt floor shift lower block off cover $10. / Non-tilt floor shift upper bowl bushing . Attached Images __________________ *For any return/past customers & friends* Before sending of any funds, please wait for a confirmed total and instructions for sending as our payment account info has been changed as of Jan. 2023. Thanks...

11-11-2021, 10:33 PM	#9
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,010	Re: WTB - Manual Floor Shift Column Parts The parts look great. Send me your PayPal info, and I'll send over payment for the four parts and shipping. Thanks!

11-11-2021, 10:52 PM	#10
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,010	Re: WTB - Manual Floor Shift Column Parts Payment sent

11-13-2021, 12:09 AM	#12
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,010	Re: WTB - Manual Floor Shift Column Parts Thank you.

11-18-2021, 04:10 PM	#13
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,010	Re: WTB - Manual Floor Shift Column Parts The parts arrived safe and sound. They were very nicely packaged. Thank you, Mel! Trial assembly of parts can be seen here: https://67-72chevytrucks.com/vboard/...97#post8997297



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.