Lets try this again, '75 C30, 350, TH400, 14 bolt rear $75 Janesville WI - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*botboy* · 07-14-2004, 12:42 PM

Hey guys, I won a pair of trucks on ebay, went out and got the one I wanted badly (the '67) and pulled a few parts off of the '75 that I needed. Now I don't want to go back to get the '75 cause it will cost me more in gas and time so that at best I will break even. Truck is located in Janesville Wisconsin (about 30 mins from madison off of I90). I want $75 OBO but I might be convinced to trade for parts if anyone has something I want (PM me if you want to trade with what you have)

'75 Chevy C30 2WD
350, not locked up, ran when parked, no dist or carb (I took em), 4bbl gm intake
TH400, also worked when parked
Eaton rear end (not sure what model) has 6.15 or some ridiculously high ratio in it.
All glass good except for passenger window
Body is saveable but rusty, doors are descent driver condition.

70ChevyLongbed · 07-14-2004, 01:06 PM

I want that motor... but it's too far for me

*botboy* · 07-15-2004, 12:17 AM

TTT. I'll take $60.

*botboy* · 07-16-2004, 09:34 AM

Fifty bucks. Somebody's gotta take this thing.

ZOOMY · 07-16-2004, 05:18 PM

Did the 350 run before you cannibalized it ? What about the trans ? I'm about 60 miles from there............Zoomy

*dtlilly* · 07-17-2004, 12:54 AM

Does the truck have the factory 16" white rims? I also am fairly close. Thanks, Don

*botboy* · 07-19-2004, 12:33 PM

Truck ran when parked about a year and a half ago as I understand it. Will not run now unless the cannibalized parts are replaced - will also need a battery and coolant line. Seller told me trans was in good shape, driveshaft was disconnected when I looked at it ???? don't know why. Truck looked like it had the factory rims, I don't remember if they were white or not but I do remember that they will probably need to be blasted and painted.

*botboy* · 07-20-2004, 12:15 PM

ttt

*botboy* · 07-21-2004, 09:37 AM

ttt

rin68 · 07-21-2004, 01:13 PM

are you confident that it will run, and how far could it be driven once it's running. i'm interested.

*botboy* · 07-21-2004, 02:33 PM

Quote:

Originally Posted by rin68

are you confident that it will run, and how far could it be driven once it's running. i'm interested.

Its been sitting for 2 years but I'm sure with a carb, dist and some starting fluid it could be running. However it isn't driveable, it doesn't have rear lights, one window is broken, rear driveshaft is disconnected, prolly has old gas in the saddle tanks and I'm unsure of the brake condition. I could haul it for you if you would like but I need about $180 in gas to get it back to minnesota from where its sitting.

rin68 · 07-21-2004, 11:17 PM

sorry, i'd need to it driveable to fit my situation. thanks for the quick reply

Beefcake · 07-22-2004, 08:32 AM

Im sending you a pm.

*botboy* · 07-22-2004, 12:12 PM

PM responded to

07-14-2004, 12:42 PM	#1
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	Lets try this again, '75 C30, 350, TH400, 14 bolt rear $75 Janesville WI Hey guys, I won a pair of trucks on ebay, went out and got the one I wanted badly (the '67) and pulled a few parts off of the '75 that I needed. Now I don't want to go back to get the '75 cause it will cost me more in gas and time so that at best I will break even. Truck is located in Janesville Wisconsin (about 30 mins from madison off of I90). I want $75 OBO but I might be convinced to trade for parts if anyone has something I want (PM me if you want to trade with what you have) '75 Chevy C30 2WD 350, not locked up, ran when parked, no dist or carb (I took em), 4bbl gm intake TH400, also worked when parked Eaton rear end (not sure what model) has 6.15 or some ridiculously high ratio in it. All glass good except for passenger window Body is saveable but rusty, doors are descent driver condition.

07-14-2004, 01:06 PM	#2
70ChevyLongbed Howzit?!? Join Date: Jan 2003 Location: Maryville, TN Posts: 1,266	I want that motor... but it's too far for me __________________ Jason Hawaiian-J 70 Longbed, 307, Edelbrock Carb 1404, Edelbrock Intake 2101, Dual Roller Timing chain and gears, 214/214 cam, Comp Roller Rockers, dual Flowmasters. 1999 Chevy Tahoe 2004 Mini Cooper S 71 BMW 2002 - Sold

07-16-2004, 05:18 PM	#5
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	350/400 Did the 350 run before you cannibalized it ? What about the trans ? I'm about 60 miles from there............Zoomy

07-21-2004, 01:13 PM	#10
rin68 Senior Member Join Date: Mar 2000 Location: East Peoria, IL Posts: 600	are you confident that it will run, and how far could it be driven once it's running. i'm interested. __________________ 1968 C10 - 383, non-stop project 1969 Camaro - 327, bone stock family heirloom...soon to be LS/T56, Ridetech, all the goodies

07-21-2004, 11:17 PM	#12
rin68 Senior Member Join Date: Mar 2000 Location: East Peoria, IL Posts: 600	sorry, i'd need to it driveable to fit my situation. thanks for the quick reply __________________ 1968 C10 - 383, non-stop project 1969 Camaro - 327, bone stock family heirloom...soon to be LS/T56, Ridetech, all the goodies

07-15-2004, 12:17 AM	#3
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	TTT. I'll take $60.

07-16-2004, 09:34 AM	#4
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	Fifty bucks. Somebody's gotta take this thing.

07-17-2004, 12:54 AM	#6
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Does the truck have the factory 16" white rims? I also am fairly close. Thanks, Don

07-19-2004, 12:33 PM	#7
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	Truck ran when parked about a year and a half ago as I understand it. Will not run now unless the cannibalized parts are replaced - will also need a battery and coolant line. Seller told me trans was in good shape, driveshaft was disconnected when I looked at it ???? don't know why. Truck looked like it had the factory rims, I don't remember if they were white or not but I do remember that they will probably need to be blasted and painted.

07-20-2004, 12:15 PM	#8
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	ttt

07-21-2004, 09:37 AM	#9
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	ttt

07-22-2004, 08:32 AM	#13
Beefcake Registered User Join Date: Mar 2003 Location: Motor City Posts: 540	Im sending you a pm. __________________ 72 GMC Camper Special 2500. currently has 350/350/14 bolt. 383 and 400 tranny is in the works.

07-22-2004, 12:12 PM	#14
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	PM responded to



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.