|
12-20-2021, 10:11 AM
|
#1 |
|
Registered User
 Join Date: Aug 2019
Location: Cheraw
Posts: 1,300
|
A/C POA clamp
What color or metal finish should the clamp be that holds the POA valve to the A/C evap case. I tryed to phosphate coat it and it came out kind of an orange color.
|
|
|
|
12-20-2021, 10:32 PM
|
#2 |
|
Registered User
Join Date: Apr 2014
Location: California
Posts: 976
|
Re: A/C POA clamp
I believe they should have a Zinc or cadmium type finish.
|
|
|
|
|
12-21-2021, 01:03 AM
|
#3 |
|
Senior Member
 
Join Date: May 2010
Location: Wisconsin & Arizona
Posts: 4,852
|
Re: A/C POA clamp
Pics of my '69 before and after restoration.
__________________
Jim |
|
|
|
|
12-21-2021, 05:25 PM
|
#4 |
|
Registered User
Join Date: Aug 2019
Location: Cheraw
Posts: 1,300
|
Re: A/C POA clamp
The large clamp at the back of the POA valve looks to be black. Is that right?
Could you send me some pictures of the A/C lines and how the condenser mounts. |
|
|
|
|
12-23-2021, 01:52 AM
|
#5 |
|
Senior Member
Join Date: May 2010
Location: Wisconsin & Arizona
Posts: 4,852
|
Re: A/C POA clamp
Hope these help. The second picture showing the A/C line routing was taken before the inner fender was installed. The last picture shows the condenser lines routed under the battery tray. I had to fabricate some of the compressor mounting brackets to accommodate the Vortec crate engine.
__________________
Jim |
|
|
|
|
12-23-2021, 12:53 PM
|
#6 |
|
Registered User
Join Date: Aug 2019
Location: Cheraw
Posts: 1,300
|
Re: A/C POA clamp
These photos are terrific. Thanks. Are there any brackets that hold the condenser and the dryer to the core support or are they part of the condenser?
|
|
|
|
|
12-23-2021, 01:54 PM
|
#7 |
|
Senior Member
Join Date: May 2010
Location: Wisconsin & Arizona
Posts: 4,852
|
Re: A/C POA clamp
The dryer is secured by 2 separate brackets. If I recall correctly, the condenser is secured by brackets permanently welded to it. I'd check, but I'm 2000 miles from my truck
EDIT: Here is the only picture I have that shows the condenser and dryer mounting provisions. Yellow highlights the dryer brackets and red shows the top condenser brackets. The bottom of the condenser is similar. Please ignore the trans cooler..
__________________
Jim Last edited by FirstOwner69; 12-23-2021 at 02:27 PM. |
|
|
|
|
12-23-2021, 06:03 PM
|
#8 |
|
Registered User
Join Date: Aug 2019
Location: Cheraw
Posts: 1,300
|
Re: A/C POA clamp
More great pictures .Thanks.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
