60-66 Panel/Suburban body to frame mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**aotte1** · 10-02-2021, 10:47 PM

60-66 Panel/Suburban rubber body to frame cushions back in stock at the truck and car shop of Orange. Just received two sets that were back ordered. Just a quick look so far. Initial photos, more later.

**MusicMan70** · 10-03-2021, 12:35 PM

Thank you for the notification and photos Aotte!

**tazattitude** · 10-04-2021, 05:29 AM

Thanks for posting.

**aotte1** · 10-06-2021, 03:14 PM

MusicMan70 and Taz, you are welcome.

Les

**tazattitude** · 10-08-2021, 05:55 AM

I have their catalog and I noticed that it says the kit is for 60-66 Suburbans
I have both a '63 and a '66. The second set of brackets from the front are different
The '63 has a solid type bracket riveted onto the frame.
The '66 has a bracket with a cushion on the side and still requires the cushion on the top of the bracket.
Does anyone know if these use the same cushion on the top of the bracket?

Also, does this kit include the front set of cushions (the round cushions)?
So I guess their is a total of 16? cushions?

This is the bracket on my '66

**72cs20** · 11-09-2021, 07:05 PM

I remember when I wanted to replace those cushions on my 65 GMC Suburban back around 1999. I ordered a set from a then big player, Golden State Pickup Parts. I was told they were on backorder. About 6 months go by and no delivery or estimate, I called my local Buick GMC dealer with the part number out of the 60-66 assembly manual. Went down to the dealer the next week and picked them up, then cancelled my order with Golden State.

**tazattitude** · 11-10-2021, 06:21 AM

Quote:

Originally Posted by aotte1

60-66 Panel/Suburban rubber body to frame cushions back in stock at the truck and car shop of Orange. Just received two sets that were back ordered. Just a quick look so far. Initial photos, more later.

I went ahead and ordered those and received them from the Truck and Car Shop (NC).
I compared to the originals and all were about 1/8" thinner.
The round front cushions I was asking about looks like they would be the square ones in the packaging.
I'm not for sure what I'm going to do on the bracket with the cushion I have in the image below. I think I will cut down one of the rectangular cushions for the underside of the bracket since a full one would not fit.

**61ChevyPanel** · 11-23-2021, 01:36 AM

Has anyone tried these on a '60 - '62?

ragtp66 · 01-01-2022, 03:21 AM

I have not yet purchased these yet but if you call and ask they will probably send pictures or dimensions. I have used lots of their products on other projects and they are always very helpful and will send samples of window run channel and other items if you ask.

https://www.restorationspecialties.c...talog_RSSI.pdf

part number 6066sub 20 pc kit includes steel cores and sleeves.

ragtp66 · 01-01-2022, 03:28 AM

I have not yet purchased these yet but if you call and ask they will probably send pictures or dimensions. I have used lots of their products on other projects and they are always very helpful and will send samples of window run channel and other items if you ask.

https://www.restorationspecialties.c...talog_RSSI.pdf

part number 6066sub 20 pc kit includes steel cores and sleeves.

10-02-2021, 10:47 PM	#1
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	60-66 Panel/Suburban body to frame mounts 60-66 Panel/Suburban rubber body to frame cushions back in stock at the truck and car shop of Orange. Just received two sets that were back ordered. Just a quick look so far. Initial photos, more later. Attached Images Last edited by aotte1; 10-02-2021 at 10:54 PM.

10-03-2021, 12:35 PM	#2
MusicMan70 Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 1,842	Re: 60-66 Panel/Suburban body to frame mounts Thank you for the notification and photos Aotte! __________________ MusicMan70 1961 GMC Suburban

10-04-2021, 05:29 AM	#3
tazattitude Senior Member Join Date: Oct 2010 Location: Largo, FL Posts: 532	Re: 60-66 Panel/Suburban body to frame mounts Thanks for posting. __________________ TAZ BUILDS 1966 GMC Suburban 1963 GMC Suburban Patina frame-on FOR Sale 1966 C10 Short Bed (2010-11) Monthly Updates 2015 C10 Pics with my '72 Montego GT 429/521 build 1963 Pro Street C10 back halved. Frame off I did back in 1990 Pics / Video

10-06-2021, 03:14 PM	#4
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: 60-66 Panel/Suburban body to frame mounts MusicMan70 and Taz, you are welcome. Les

10-08-2021, 05:55 AM	#5
tazattitude Senior Member Join Date: Oct 2010 Location: Largo, FL Posts: 532	Re: 60-66 Panel/Suburban body to frame mounts I have their catalog and I noticed that it says the kit is for 60-66 Suburbans I have both a '63 and a '66. The second set of brackets from the front are different The '63 has a solid type bracket riveted onto the frame. The '66 has a bracket with a cushion on the side and still requires the cushion on the top of the bracket. Does anyone know if these use the same cushion on the top of the bracket? Also, does this kit include the front set of cushions (the round cushions)? So I guess their is a total of 16? cushions? This is the bracket on my '66 __________________ TAZ BUILDS 1966 GMC Suburban 1963 GMC Suburban Patina frame-on FOR Sale 1966 C10 Short Bed (2010-11) Monthly Updates 2015 C10 Pics with my '72 Montego GT 429/521 build 1963 Pro Street C10 back halved. Frame off I did back in 1990 Pics / Video

11-09-2021, 07:05 PM	#6
72cs20 Senior Member Join Date: Jul 2014 Location: Los Gatos, Ca. Posts: 407	Re: 60-66 Panel/Suburban body to frame mounts I remember when I wanted to replace those cushions on my 65 GMC Suburban back around 1999. I ordered a set from a then big player, Golden State Pickup Parts. I was told they were on backorder. About 6 months go by and no delivery or estimate, I called my local Buick GMC dealer with the part number out of the 60-66 assembly manual. Went down to the dealer the next week and picked them up, then cancelled my order with Golden State. __________________ 1966 K20 flatbed build thread - http://www.67-72chevytrucks.com/vboa...d.php?t=768827 62 C20 build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=703583

11-23-2021, 01:36 AM	#8
61ChevyPanel Active Member Join Date: Nov 2011 Location: Los Angeles, CA Posts: 113	Re: 60-66 Panel/Suburban body to frame mounts Has anyone tried these on a '60 - '62?

01-01-2022, 03:21 AM	#9
ragtp66 Registered User Join Date: Jan 2019 Location: Joliet,IL Posts: 5	Re: 60-66 Panel/Suburban body to frame mounts I have not yet purchased these yet but if you call and ask they will probably send pictures or dimensions. I have used lots of their products on other projects and they are always very helpful and will send samples of window run channel and other items if you ask. https://www.restorationspecialties.c...talog_RSSI.pdf part number 6066sub 20 pc kit includes steel cores and sleeves.

01-01-2022, 03:28 AM	#10
ragtp66 Registered User Join Date: Jan 2019 Location: Joliet,IL Posts: 5	Re: 60-66 Panel/Suburban body to frame mounts I have not yet purchased these yet but if you call and ask they will probably send pictures or dimensions. I have used lots of their products on other projects and they are always very helpful and will send samples of window run channel and other items if you ask. https://www.restorationspecialties.c...talog_RSSI.pdf part number 6066sub 20 pc kit includes steel cores and sleeves.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.