Need help with idle arm identification - The 1947 - Present Chevrolet & GMC Truck Message Board Network

olharleyman · 01-10-2022, 06:06 PM

[B]ok so my 69 has a 73 - 87 disk conversionand I've bought 3 different kits to replace the entire front end , I finally got the right parts EXCEPT FOR THE IDLER ARM on one end it has a big ball joint if you will the other side is smaller I've tried with summit , jegs , classic industries and Lmc anyone have a clue as to where I can find the correct part ?
This is the only part number I've found on it
758

74x

I can figure out to share pics but if someone can help me I have a few pics for reference

**HO455** · 01-12-2022, 01:56 PM

Have looked at this thread? It is likely the answer is there.

http://67-72chevytrucks.com/vboard/s...d.php?t=456889

I suggest doing a search for how to post pictures including the source for photos you are using. I'm sure every conceivable camera except Polaroid Instamatics have been documented.

**kev2809** · 01-12-2022, 08:08 PM

imo your best bet is a local auto parts store. that way returning the wrong ones are a breeze.

when you say you ordered 3 different kits...were those online too or local auto stores?

01-10-2022, 06:06 PM	#1
olharleyman Registered User Join Date: Jul 2012 Location: So.Maryland Posts: 8	Need help with idle arm identification [B]ok so my 69 has a 73 - 87 disk conversionand I've bought 3 different kits to replace the entire front end , I finally got the right parts EXCEPT FOR THE IDLER ARM on one end it has a big ball joint if you will the other side is smaller I've tried with summit , jegs , classic industries and Lmc anyone have a clue as to where I can find the correct part ? This is the only part number I've found on it 758 74x I can figure out to share pics but if someone can help me I have a few pics for reference __________________ 1969 1/2 Ton 3 Door Suburban Clam Shell Rear 454 Turbo 400 With Shift Kit Air Bagged On 20" Wheels

01-12-2022, 01:56 PM	#2
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,350	Re: Need help with idle arm identification Have looked at this thread? It is likely the answer is there. http://67-72chevytrucks.com/vboard/s...d.php?t=456889 I suggest doing a search for how to post pictures including the source for photos you are using. I'm sure every conceivable camera except Polaroid Instamatics have been documented. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

01-12-2022, 08:08 PM	#3
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Need help with idle arm identification imo your best bet is a local auto parts store. that way returning the wrong ones are a breeze. when you say you ordered 3 different kits...were those online too or local auto stores? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.