New 68 Stepper Build...IM BACK!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 01-27-2022, 10:48 AM

Wow.... Those that are following/commenting aren't enough huh?

77chris03 · 01-27-2022, 10:51 AM

Quote:

Originally Posted by SCOTI

Wow.... Those that are following/commenting aren't enough huh?

better than putting TTT>....lol no it is. Just kinda gets lonely here when your other half doesnt have any interest. Don't knock cause i dont have any "real" friends....lmao. i might be a little of an attention whore....lol

SCOTI · 01-27-2022, 12:50 PM

Quote:

Originally Posted by 77chris03

better than putting TTT>....lol no it is. Just kinda gets lonely here when your other half doesnt have any interest. Don't knock cause i dont have any "real" friends....lmao. i might be a little of an attention whore....lol

Ya gotta' remember everyone else has a life as well & their schedules might be different vs ours. Also.... Not everyone likes doing the 'wow', 'cool', 'nice job' postings.

Keep @ it!

77chris03 · 01-29-2022, 10:44 PM

Got the tanks inc fuel tank mounted. No holes were drilled in the frame. Used existing holes in the frame, marked where I wanted it, drilled the holes in the tank mount flange, and got her in. This is the only part of the truck frame that will have something metric besides the motor/trans. Used a M10x1.25x 30 bolt and flange nut. Flipped it upside down and knocked them into the holes. Tightened her up. Will tack weld the nuts to the frame to secure 100%. Doing it this way will allow me to drop the tank if I ever needed to without pulling the bed.

01-27-2022, 10:48 AM	#1
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,149	Re: New 68 Stepper Build...IM BACK!! Wow.... Those that are following/commenting aren't enough huh? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-29-2022, 10:44 PM	#4
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	Re: New 68 Stepper Build...IM BACK!! Got the tanks inc fuel tank mounted. No holes were drilled in the frame. Used existing holes in the frame, marked where I wanted it, drilled the holes in the tank mount flange, and got her in. This is the only part of the truck frame that will have something metric besides the motor/trans. Used a M10x1.25x 30 bolt and flange nut. Flipped it upside down and knocked them into the holes. Tightened her up. Will tack weld the nuts to the frame to secure 100%. Doing it this way will allow me to drop the tank if I ever needed to without pulling the bed. Attached Images __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.