Judging interest: 68 swb 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

J.Lance · 07-22-2004, 11:02 AM

If I have to, I'll let this project go. 1968 K10 short wheel base fleetside. Just over 1400 produced so relatively rare. Chassis has been restored from the bare frame. New spring bushings and cab mounts. Front and rear diffs are out of a 85 blazer so larger rear brakes and discs up front. SS braided brake lines up front.

350 4spd. Motor is 30 over and has "X" casting heads rebuilt with a 3 angle valve job. Edelbrock intake and carb. HEI. Transmission rebuilt and in excellent shape. New 12" Luke clutch. Original Rockwell T221 in excellent condition. New u-joints on the shafts.

Brand new 3" single exhaust, aluminized with a fully welded muffler.

Body is very straight but the cab needs rust repair. Front clip and grill is nice. Bed is straight but has a ding on the rear of the passenger side wheel opening and minor rust in the rear corners of the bed floor.

Factory 67-68 bucket seats (not original to the truck). Original red dash pad and visors are in perfect condition. Uncut dash.

This project stalled out on me and I loosely assembled the truck back together to consolidate the parts. It is not in running condition at this time and will need to be trailered away.

This truck is my baby and I'd hate to see it go down the road but if there is enough interest, I'll let it go.

Well over $5K invested, I'd take $4500 obo for it.

Could possibly work out a better deal if the buckets are not needed. I have no plans to part it out at this time but that could change if I get desperate for cash.

Note: Sorry about the bad angles on the pictures. The truck is currently trapped behind another truck and inbetween the house and the fence! Oh, it's also stuck behind two suburbans! Bring cash and I'll be happy to drag it out.

pickupman · 07-22-2004, 01:23 PM

Do you have any pictures available.
Thanks Bill

J.Lance · 07-22-2004, 03:17 PM

I'll get some posted tonight.

J.Lance · 07-22-2004, 07:43 PM

ttt with pictures

pickupman · 07-22-2004, 09:25 PM

Is it a true 68 short 4wd and frame with correct title?

teeitup · 07-22-2004, 11:34 PM

OH Jason!!!!!!!! That truck is a nice project, I may have to sell one of my projects!!!!!!!!!!

jamesjones · 07-23-2004, 01:42 AM

Do you have any pics of the major rust areas?

J.Lance · 07-23-2004, 09:11 AM

Yes it is a true '68 SWB 4X4 fleetside. The truck was all original when I bought it back in 2000. Originally equiped with a 307 but the owner told me it threw a rod. I also have a 1968 large journal steel crank 327 builder motor that I'd let go with it if someone is interested.

Forgot to mention that it has a brand new power steering gear!

Randy, I think you might need this truck!

As for the rust, I don't have pics right now but I'll describe it. The floor pans are solid. Will need rockers and backers, corners, and rear supports. Both rockers have been cut out. That's the major stuff. As mentioned, a spot on the bed floor in each of the rear corners.

I'll try to get some more pics of the cab tonight if it stops raining.

teeitup · 07-23-2004, 01:45 PM

Jason, momma didn't say much when I said something to her about it, I'll work on her a bit.

J.Lance · 07-23-2004, 03:42 PM

Quote:

Originally Posted by teeitup

Jason, momma didn't say much when I said something to her about it, I'll work on her a bit.

Let me know. I'll roll her out and clean her up!

Here are some pics of the problem areas in the cab. Some good, some bad.

J.Lance · 07-23-2004, 10:14 PM

ttt with some new pics. Feel free to request more. The cargo trailer I want is $6500 so this is definitely for sale! Need some $$$$s.

ChevyDude · 07-24-2004, 10:37 AM

TTT for Jason. Wow, that is gonna make someone a nice project! I'd sure like to have it if I didn't have two already.

J.Lance · 07-25-2004, 01:53 PM

Quote:

Originally Posted by ChevyDude

TTT for Jason. Wow, that is gonna make someone a nice project! I'd sure like to have it if I didn't have two already.

Only two! Come on now, you at least need 3 to be legitimate! Just kidding!

Randy, here are some more pics of the dent on the passenger side. Also a pic of a ding on the nose of the hood (stupid wind!), and a pic of the driver bedside.

07-22-2004, 11:02 AM	#1
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	Judging interest: 68 swb 4x4, pics added! If I have to, I'll let this project go. 1968 K10 short wheel base fleetside. Just over 1400 produced so relatively rare. Chassis has been restored from the bare frame. New spring bushings and cab mounts. Front and rear diffs are out of a 85 blazer so larger rear brakes and discs up front. SS braided brake lines up front. 350 4spd. Motor is 30 over and has "X" casting heads rebuilt with a 3 angle valve job. Edelbrock intake and carb. HEI. Transmission rebuilt and in excellent shape. New 12" Luke clutch. Original Rockwell T221 in excellent condition. New u-joints on the shafts. Brand new 3" single exhaust, aluminized with a fully welded muffler. Body is very straight but the cab needs rust repair. Front clip and grill is nice. Bed is straight but has a ding on the rear of the passenger side wheel opening and minor rust in the rear corners of the bed floor. Factory 67-68 bucket seats (not original to the truck). Original red dash pad and visors are in perfect condition. Uncut dash. This project stalled out on me and I loosely assembled the truck back together to consolidate the parts. It is not in running condition at this time and will need to be trailered away. This truck is my baby and I'd hate to see it go down the road but if there is enough interest, I'll let it go. Well over $5K invested, I'd take $4500 obo for it. Could possibly work out a better deal if the buckets are not needed. I have no plans to part it out at this time but that could change if I get desperate for cash. Note: Sorry about the bad angles on the pictures. The truck is currently trapped behind another truck and inbetween the house and the fence! Oh, it's also stuck behind two suburbans! Bring cash and I'll be happy to drag it out. Attached Images __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!) Last edited by J.Lance; 07-22-2004 at 07:40 PM. Reason: pictures

07-22-2004, 01:23 PM	#2
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,095	Do you have any pictures available. Thanks Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

07-22-2004, 03:17 PM	#3
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	pics I'll get some posted tonight. __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

07-22-2004, 07:43 PM	#4
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	ttt with pictures __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

07-22-2004, 09:25 PM	#5
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,095	Is it a true 68 short 4wd and frame with correct title? __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

07-22-2004, 11:34 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	OH Jason!!!!!!!! That truck is a nice project, I may have to sell one of my projects!!!!!!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-23-2004, 01:42 AM	#7
jamesjones Freakin Awesome! Join Date: Jul 2003 Location: San Diego Posts: 482	Do you have any pics of the major rust areas? __________________ 1972 K5 Blazer - LQ4/TH350/NP205 - Long Travel Suspension - Hooptee

07-23-2004, 09:11 AM	#8
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	Yes it is a true '68 SWB 4X4 fleetside. The truck was all original when I bought it back in 2000. Originally equiped with a 307 but the owner told me it threw a rod. I also have a 1968 large journal steel crank 327 builder motor that I'd let go with it if someone is interested. Forgot to mention that it has a brand new power steering gear! Randy, I think you might need this truck! As for the rust, I don't have pics right now but I'll describe it. The floor pans are solid. Will need rockers and backers, corners, and rear supports. Both rockers have been cut out. That's the major stuff. As mentioned, a spot on the bed floor in each of the rear corners. I'll try to get some more pics of the cab tonight if it stops raining. __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

07-23-2004, 01:45 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Jason, momma didn't say much when I said something to her about it, I'll work on her a bit. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-23-2004, 10:14 PM	#11
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	ttt with some new pics. Feel free to request more. The cargo trailer I want is $6500 so this is definitely for sale! Need some $$$$s. __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

07-24-2004, 10:37 AM	#12
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	TTT for Jason. Wow, that is gonna make someone a nice project! I'd sure like to have it if I didn't have two already. __________________ Alex 1971 Lil' Red 350 SBC 700R4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.