TX Parting out 69 GMC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bobvilla67** · 01-30-2022, 02:00 PM

I’m parting this out in only in big parts. I will sell cab with doors and interior complete. 2000. Cab has been repainted and has had rockers and any rust repaired. All glass is good. Super clean truck. Bed and tailgate are clean with no rust. Front clip is ok. Reproduction driver fender and some dings on hood. It was wrecked in driver side front and frame is buckled. I have another frame for it but I don’t have time to mess with it and I need the space.
Cab/doors/ interior 2000
Bed with tailgate 1000
Front clip 350. No inner fenders.
350/350 engine and trans 750

**too much stuff** · 01-30-2022, 02:19 PM

Would be interested in the seat and possibly the engine pending condition and application. What can you tell me about it?

**bobvilla67** · 01-30-2022, 02:29 PM

Quote:

Originally Posted by too much stuff

Would be interested in the seat and possibly the engine pending condition and application. What can you tell me about it?

Keeping seat with cab. Engine and trans are out of later model blazer. Not original to the truck. But was running and driving fine until I pulled to set in the GMC.
Posted via Mobile Device

**too much stuff** · 01-30-2022, 02:35 PM

Quote:

Originally Posted by bobvilla67

Keeping seat with cab. Engine and trans are out of later model blazer. Not original to the truck. But was running and driving fine until I pulled to set in the GMC.
Posted via Mobile Device

Will pass on the engine... Wish i had a little more room on the trailer.

**bobvilla67** · 02-02-2022, 02:30 PM

I would be willing to sell complete just to make some room.

**WETOWM** · 02-02-2022, 04:40 PM

Will you be seling the fan blade

**bobvilla67** · 02-02-2022, 08:03 PM

Not selling fan blade

**bobvilla67** · 02-04-2022, 08:38 PM

Sold pending pick up.

JFunk68 · 02-17-2022, 10:11 AM

Was the sale of the truck successful?

**bobvilla67** · 02-17-2022, 10:18 AM

Yes. Sale was successful.

01-30-2022, 02:00 PM	#1
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	Parting out 69 GMC I’m parting this out in only in big parts. I will sell cab with doors and interior complete. 2000. Cab has been repainted and has had rockers and any rust repaired. All glass is good. Super clean truck. Bed and tailgate are clean with no rust. Front clip is ok. Reproduction driver fender and some dings on hood. It was wrecked in driver side front and frame is buckled. I have another frame for it but I don’t have time to mess with it and I need the space. Cab/doors/ interior 2000 Bed with tailgate 1000 Front clip 350. No inner fenders. 350/350 engine and trans 750 Attached Images __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

01-30-2022, 02:19 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Parting out 69 GMC Would be interested in the seat and possibly the engine pending condition and application. What can you tell me about it? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-02-2022, 02:30 PM	#5
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	Re: Parting out 69 GMC I would be willing to sell complete just to make some room. __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

02-02-2022, 04:40 PM	#6
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,119	Re: Parting out 69 GMC Will you be seling the fan blade

02-02-2022, 08:03 PM	#7
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	Re: Parting out 69 GMC Not selling fan blade __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

02-04-2022, 08:38 PM	#8
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	Re: Parting out 69 GMC Sold pending pick up. __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

02-17-2022, 10:11 AM	#9
JFunk68 Registered User Join Date: Feb 2022 Location: Angleton TX Posts: 1	Re: Parting out 69 GMC Was the sale of the truck successful?

02-17-2022, 10:18 AM	#10
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	Re: Parting out 69 GMC Yes. Sale was successful. __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.