Canada WTB Pictured Rear Window Molding

[Already Gone]

Looking for an original used rear window gasket molding ,pictured, in reasonably good shape. Would like it shipped to Western Canada wrapped in bubble wrap and inserted into a piece of ABS Plastic Pipe for the trip.

[Cash3481]

Originally Posted by Already Gone

Looking for an original used rear window gasket molding ,pictured, in reasonably good shape. Would like it shipped to Western Canada wrapped in bubble wrap and inserted into a piece of ABS Plastic Pipe for the trip.

I can look tonight for you and if theres on up in the garage Ill let you know.

[Already Gone]

Originally Posted by Cash3481

I can look tonight for you and if theres on up in the garage Ill let you know.

I guess that molding is year specific and I need need from a 71-72 truck.

[tshetty]

@ Already Gone, I have a rear window trim set for sale. There are some small dents in the lower edge you highlighted yet they could most likely be smoothed out. I would rather sell them as a "set". I can get you some photos if you are interested.

[Already Gone]

Originally Posted by tshetty

@ Already Gone, I have a rear window trim set for sale. There are some small dents in the lower edge you highlighted yet they could most likely be smoothed out. I would rather sell them as a "set". I can get you some photos if you are interested.

Yes, if they are from a 71-72 please post the pictures. I am looking for someone restoring a truck and they said if they had to buy a whole set to get the needed one so be it.

[tshetty]

@ Already Gone I'll get you some photos this weekend sir. Fresh off of a 1972 C20 I parted out.

[michael bustamante]

just a heads up, ive used the pvc as shipping material in the past. do not just tape the ends, the piece inside will punch thru if not wrapped properly, also you might want to stuff both ends with bubble wrap as well. .

[Already Gone]

Originally Posted by michael bustamante

just a heads up, ive used the pvc as shipping material in the past. do not just tape the ends, the piece inside will punch thru if not wrapped properly, also you might want to stuff both ends with bubble wrap as well. .

Thanks for the info.

[Cash3481]

I found a couple bunches of trim I’m going through to see if it’s in there. Can you confirm you need deep trim pieces. ( there is shallow and deep pieces).

[Already Gone]

Originally Posted by Cash3481

I found a couple bunches of trim I’m going through to see if it’s in there. Can you confirm you need deep trim pieces. ( there is shallow and deep pieces).

I was told I need the short lip molding which is for71-72.

[Classic Bowties]

Originally Posted by Already Gone

I was told I need the short lip molding which is for71-72.

You may want to double check with whoever gave you that info as they may have been referring to the front glass (windshield) trim which was either the 67-70 (tall lip) style or the 71-72 (short lip) style. There is only one (tall lip) style of 67-72 trim for the rear glass, while on the subject of the deluxe window trim, here are the precision brand part numbers for the 67-72 front and rear glass gaskets. Mel

#WBL685 } 67-72 front w/o trim.
#WCR685 } 67-70 front w/trim.
#WCR685A } 71-72 front w/trim.

#WBLD1092T } 68-72 rear w/o trim & 67 w/panoramic.
#WCR1092T } 68-72 rear w/trim & 67 w/panoramic.
__________________