2wd and 4wd Power steering boxes $25 each - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 07-17-2004, 04:41 PM

I have quite a few 2wd and 4x4 PS boxes, they need cleaned up but ready for use. $25 each plus shipping. Thanks Randy

67ChevyC10Stepside · 07-17-2004, 06:24 PM

wonder why noone has bought any yet..

67ChevyC10Stepside · 07-17-2004, 06:25 PM

btw you got a complete 2wd setup? pump bracket and box? $?

**Ironhorse** · 07-17-2004, 06:33 PM

Hey Randy, In regards to the 4x4 steering boxes, are the seals tight and no leaks like the one on my truck LOL? Remove and replace with your box? Got one to fit a 71 Chevy 4x4 with the 350 V-8? What would the shipping be to 67152, just a fair spit away from ya' here in the flatlands.

teeitup · 07-18-2004, 03:35 PM

67chevy, no pumps right now
Gary, I'll go out and get you a pic of what I have.
Thanks Randy

Stanford · 07-18-2004, 03:36 PM

Do you know how hard or what all is involved with going from manual steering to power steering. Im wanting to convert my 68 gmc 3/4, 4x4 over, I have the pump, just no gear box. I would be interested in one. Im up in KC this summer so maybe one of these weekend ucmydust68 and myself may be able to run up and check out your parts lot.

Thanks,

Aaron Stanford

teeitup · 07-18-2004, 04:42 PM

Gary, here is a pic of one I have.
Aaron, I think you have to shim it out off the frame, Yukon Jack changed his over, he could tell you what all you need for sure. I got 4 or 5 4x4 boxes left. Let me know when you can come over.
Thanks Randy

teeitup · 07-18-2004, 04:44 PM

pic for you Gary

72shadetree · 07-18-2004, 07:08 PM

randy do you have one that dont leak and is tight for my 72.what would shipping be to 24055 thanks henry

teeitup · 07-19-2004, 07:24 AM

Henry, I'll look at the 2wd boxes tonight and let you know. Thanks Randy

farfromhome · 07-19-2004, 12:29 PM

teeitup, hey I'm interested in one of the 2wd powerboxes.I'm in colorado 80913 if you could find out how much shipping would be or tell me how that would be great.Do they leak at all? mines toast right now so anything would be an improvement.2 years ago or so I bought a engine harness from you and have had no problems. I was in Leavenworth and drove out to the course over by Perry Lake.The harness works great,If I got a good power steering box it would make me a happy man,but then my wife would drive the truck more.

**Ironhorse** · 07-19-2004, 04:40 PM

Hey Randy, Sent you a PM. Thanks, Gary

nick2184 · 07-19-2004, 10:56 PM

I need a good 2wd steering box and arm. Also do you have any tire rod assemblies that will fit a 72 dana 44 with flat top knuckle. what is the shipping to 61728? Thanks

farfromhome · 07-19-2004, 11:51 PM

I pm'ed you Randy Thanks

8mag · 07-20-2004, 07:23 AM

i need a 4x4 box, cleanest and tightest unit you have shipped to 83651. let me know 8mag@outdrs.net

teeitup · 07-20-2004, 08:55 PM

Pm'd and emailed you guys, Thanks Randy

teeitup · 07-23-2004, 07:42 PM

Still have a few of these with arms on them for $25 plus shipping, I have several without arms $15 each plus shipping!!!!!

earl87gta · 07-24-2004, 07:27 PM

I could use a 2 wheel box with out the arm could you check shipping to tn 37601

teeitup · 07-24-2004, 08:03 PM

Here ya go Jim.
Earl I'm pm'ing you

**JIMs70GMC** · 07-25-2004, 02:45 AM

That be the monster I'm looking for. Thanks Randy!

1969K10 · 07-27-2004, 11:21 AM

i got a friend here local that is interested in a 2wd. cost to ship to 47905?

teeitup · 07-27-2004, 12:57 PM

69K10, one with arm or without?

07-17-2004, 04:41 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	2wd and 4wd Power steering boxes $25 each I have quite a few 2wd and 4x4 PS boxes, they need cleaned up but ready for use. $25 each plus shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-17-2004, 06:24 PM	#2
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	wonder why noone has bought any yet.. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

07-17-2004, 06:25 PM	#3
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	btw you got a complete 2wd setup? pump bracket and box? $? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

07-17-2004, 06:33 PM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Hey Randy, In regards to the 4x4 steering boxes, are the seals tight and no leaks like the one on my truck LOL? Remove and replace with your box? Got one to fit a 71 Chevy 4x4 with the 350 V-8? What would the shipping be to 67152, just a fair spit away from ya' here in the flatlands. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

07-18-2004, 03:35 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	67chevy, no pumps right now Gary, I'll go out and get you a pic of what I have. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-18-2004, 03:36 PM	#6
Stanford WILLY FOR PRESIDENT!! Join Date: Feb 2004 Location: Wichita, Kansas Posts: 190	Do you know how hard or what all is involved with going from manual steering to power steering. Im wanting to convert my 68 gmc 3/4, 4x4 over, I have the pump, just no gear box. I would be interested in one. Im up in KC this summer so maybe one of these weekend ucmydust68 and myself may be able to run up and check out your parts lot. Thanks, Aaron Stanford __________________ *"He's a high tech REDNECK."* George Jones '67 C/10 FOR SALE!! $600, runs, strait grill, good parts, or beater truck '68 GMC K25, 4x4, current project '71 Custom/10, Crate 350, My Baby!! '97 Pontiac Grand Prix GTP

07-18-2004, 04:42 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Gary, here is a pic of one I have. Aaron, I think you have to shim it out off the frame, Yukon Jack changed his over, he could tell you what all you need for sure. I got 4 or 5 4x4 boxes left. Let me know when you can come over. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-18-2004, 04:44 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	pic for you Gary __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-18-2004, 07:08 PM	#9
72shadetree KEEP ON TRUCKING Join Date: Sep 2000 Location: martinsville va Posts: 2,563	randy do you have one that dont leak and is tight for my 72.what would shipping be to 24055 thanks henry __________________ 72 cheyenne 2wd lwb 71 k20 sons bassett va

07-19-2004, 07:24 AM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Henry, I'll look at the 2wd boxes tonight and let you know. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-19-2004, 12:29 PM	#11
farfromhome Registered User Join Date: Mar 2003 Location: Maryland Posts: 36	teeitup, hey I'm interested in one of the 2wd powerboxes.I'm in colorado 80913 if you could find out how much shipping would be or tell me how that would be great.Do they leak at all? mines toast right now so anything would be an improvement.2 years ago or so I bought a engine harness from you and have had no problems. I was in Leavenworth and drove out to the course over by Perry Lake.The harness works great,If I got a good power steering box it would make me a happy man,but then my wife would drive the truck more.

07-19-2004, 04:40 PM	#12
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Hey Randy, Sent you a PM. Thanks, Gary __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

07-19-2004, 10:56 PM	#13
nick2184 Registered User Join Date: Dec 2003 Location: IL Posts: 48	I need a good 2wd steering box and arm. Also do you have any tire rod assemblies that will fit a 72 dana 44 with flat top knuckle. what is the shipping to 61728? Thanks

07-19-2004, 11:51 PM	#14
farfromhome Registered User Join Date: Mar 2003 Location: Maryland Posts: 36	I pm'ed you Randy Thanks

07-20-2004, 07:23 AM	#15
8mag Registered User Join Date: Jun 2001 Location: nampa idaho,usa Posts: 92	steering box i need a 4x4 box, cleanest and tightest unit you have shipped to 83651. let me know 8mag@outdrs.net __________________ 1972 3/4 4x4,14bolt locker rear, dana44 lock right front, sm465, sb 400, blazer tank,dual batterys,3"lift,32-9.00-16 super swampers daily driver other trucks 1972 1 ton dually 4x4,454 4 spd,,235-85-16, flat bed front and rear winches, rear gas tank and under bed gun safe.tilt wheel



Register or Log In To remove these advertisements.

07-20-2004, 08:55 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Pm'd and emailed you guys, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-23-2004, 07:42 PM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Still have a few of these with arms on them for $25 plus shipping, I have several without arms $15 each plus shipping!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-24-2004, 07:27 PM	#18
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	I could use a 2 wheel box with out the arm could you check shipping to tn 37601 __________________ Earl 68 2500 4x4 GMC Burb

07-24-2004, 08:03 PM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Here ya go Jim. Earl I'm pm'ing you __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-25-2004, 02:45 AM	#20
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	That be the monster I'm looking for. Thanks Randy! __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

07-27-2004, 11:21 AM	#21
1969K10 Senior Member Join Date: Jul 2004 Location: Clarks Hill, Indiana Posts: 733	2wd and 4wd power steering boxes $25 i got a friend here local that is interested in a 2wd. cost to ship to 47905?

07-27-2004, 12:57 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	69K10, one with arm or without? __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.