want to row the gears? I can help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68C15 · 07-27-2004, 10:04 PM

I have for sale or trade the complete setup to put a granny 4 speed SM435 in a 2wd. (trans, clutch, flywheel, bell housing, clutch linkage, pedal & starter). do not have a trans Xmember though. it all came from my '68 GMC C1500 which I got from the original owner. he was very gentle. 20 MPH in high gear for 7 blocks twice a day. I dont know what it is all worth. shipping would be a problem, may need to pick up or relay ride.
also have 3 on the tree stuff from a '80 C10. same completeness as above.
thanks, Todd

07-27-2004, 10:04 PM	#1
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	want to row the gears? I can help I have for sale or trade the complete setup to put a granny 4 speed SM435 in a 2wd. (trans, clutch, flywheel, bell housing, clutch linkage, pedal & starter). do not have a trans Xmember though. it all came from my '68 GMC C1500 which I got from the original owner. he was very gentle. 20 MPH in high gear for 7 blocks twice a day. I dont know what it is all worth. shipping would be a problem, may need to pick up or relay ride. also have 3 on the tree stuff from a '80 C10. same completeness as above. thanks, Todd __________________ Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card Last edited by 68C15; 07-27-2004 at 10:06 PM. Reason: including starter



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.