The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-08-2022, 12:36 PM   #1
BrentBTK
Registered User
 
Join Date: Nov 2021
Location: Cumming, Ga
Posts: 163
Interesting Electrical Discovery

When I installed my new engine, it came with a one wire alternator. Because I just wasn't sure, I also connected the brown "alternator" wire from the American Auto wiring harness to the same post. Out of curiosity, I disconnected that small wire today to see if it made a difference. It did not. UNTIL... I shut the truck down and the electric fans that had previously run after it was off no longer do. Apparently the "electric fan" wire in the AAW wiring harness gets its power from that wire. Makes me wonder what else might. Clock still works. I don't think the fans shutting off with the truck are an issue, correct me if I'm wrong. Mechanical fans don't continue to spin...I kinda prefer it this way, honestly.
BrentBTK is offline   Reply With Quote
Old 04-08-2022, 02:49 PM   #2
pjmoreland
Senior Member

 
pjmoreland's Avatar
 
Join Date: Jan 2005
Location: CA
Posts: 5,975
Re: Interesting Electrical Discovery

That brown wire comes from your ignition switch, so you were back-feeding your electrical system by piggybacking it onto the other alternator wire that is always live.
pjmoreland is offline   Reply With Quote
Old 04-08-2022, 02:59 PM   #3
BrentBTK
Registered User
 
Join Date: Nov 2021
Location: Cumming, Ga
Posts: 163
Re: Interesting Electrical Discovery

Quote:
Originally Posted by pjmoreland View Post
That brown wire comes from your ignition switch, so you were back-feeding your electrical system by piggybacking it onto the other alternator wire that is always live.
That makes sense. So I'm guessing the fans are ignition controlled after all, and I was just forcing that circuit to be constantly hot.
BrentBTK is offline   Reply With Quote
Old 04-08-2022, 03:00 PM   #4
pjmoreland
Senior Member

 
pjmoreland's Avatar
 
Join Date: Jan 2005
Location: CA
Posts: 5,975
Re: Interesting Electrical Discovery

We at least partially hot because that brown wire has higher resistance than a normal wire.
pjmoreland is offline   Reply With Quote
Old 04-08-2022, 07:18 PM   #5
RustyPile
Registered User
 
RustyPile's Avatar
 
Join Date: Dec 2017
Location: Elkhart, Texas
Posts: 1,841
Re: Interesting Electrical Discovery

Quote:
Originally Posted by BrentBTK View Post
That makes sense. So I'm guessing the fans are ignition controlled after all, and I was just forcing that circuit to be constantly hot.
That brown wire is used exclusively for a conventional internally regulated alternator.. If you insist on using (I don't recommend it) that one wire alternator, leave that brown wire disconnected.. Keep this in mind in doing so.. It's not a good idea to leave a disconnected live wire running loose in a wiring harness.

Countless posts and threads (pro and con) have been made about those one wire alternators. If you're interested in learning, do some searching on this site and learn about them..
RustyPile is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:35 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com