My solution to Wheel Vintiques Series 62’s

[SCOTI]

Originally Posted by ltdmstr

I'm going to use 245s on the front which are same diameter. Tires a little small, but should be fine with a mild drop. Guy I bought it from had the thing slammed pretty good and was running 295/70/15s on the back, which barely fit and were almost impossible to get off without messing up the fender/trim. Fronts he had 255/70/15 with spacers. But the inside wall was still all chewed up. Whole thing was a mess. It's going down to the frame for a complete redo. It's a '74 shortbed with 454/TH400. Going back to stock 2-tone color scheme which was Rosedale Red/Frost and white steelies with T/A Radials.

225/70's on 8's & 275/60's on 10"s is my usual suggestion for the height w/very similar section width vs wheel width. Your F/R heights & section widths being incrementally similar works well visually w/the right drop. Post up pics when you get them.