MD 69-72 OEM Woodgrain Short bed moldings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**72 Super** · 02-06-2022, 08:18 PM

A very nice set of used OEM wood grain moldings for a short bed. I was told that they were in a body shop. They were covered with dust and overspray. I spent a couple of hours cleaning off the overspray and polishing them. They turned out real nice. The woodgrain on the passenger side piece in front of the wheel is a shade lighter. The Drivers side piece in front of the wheel has some flaws in the Woodgrain on the outer edges (see pictures). These would look super on a survivor type truck. The bright work only has slight oxidation in a few spots. Very straight. They are not bent anywhere and just a couple of small pencil point sized marks. No clips. Not perfect but very nice.

$210 shipped and insured.

Check or money order preferred. PayPal + Fees is okay.

Thanks,
Ray

**72 Super** · 02-06-2022, 08:21 PM

more pictures

**72 Super** · 02-06-2022, 08:29 PM

more pictures

**72 Super** · 02-10-2022, 07:44 PM

I have spent a lot of time cleaning and polishing these moldings. They are really nice.

$275 shipped
Check or money order preferred. PayPal + fees okay as well.

Thank you,
Ray

**72 Super** · 02-22-2022, 07:39 PM

I was advised that the passenger side molding in front of the wheel opening is more than likely a reproduction with the lighter shade Woodgrain.

Lowered to $200 shipped.

Check or money order preferred. PayPal +fees okay.

Thanks,
Ray

**72 Super** · 04-04-2022, 08:18 PM

Lowered to $170 shipped.

Thanks,
Ray

blap · 04-14-2022, 10:25 PM

PM sent

**72 Super** · 04-15-2022, 07:10 AM

Sold to blap.

Thanks,
Ray

**special-K** · 04-15-2022, 09:43 AM

If needed, I a selection of upper trim in my stash that may be suitable. I haven't put the elbow grease to them like Ray has to these

Tuff Gong · 04-15-2022, 10:37 AM

What did you used to polish these?

**72 Super** · 04-15-2022, 01:25 PM

Quote:

Originally Posted by Tuff Gong

What did you used to polish these?

Light compound and went over them with Mother’s polish.

Tuff Gong · 04-16-2022, 01:30 PM

Thank you

**72 Super** · 04-16-2022, 02:12 PM

Quote:

Originally Posted by Tuff Gong

Thank you

You’re welcome.

These weren’t really faded like some tend to be. They were just covered in overspray.

Ray

blap · 05-05-2022, 06:15 AM

Ray Moldings arrived ,excellent packaging and moldings are just as you described them. Thanks so much.

**72 Super** · 05-05-2022, 11:38 AM

Quote:

Originally Posted by blap

Ray Moldings arrived ,excellent packaging and moldings are just as you described them. Thanks so much.

Glad they arrived safe and you are happy with them.

Thanks again,
Ray

02-06-2022, 08:18 PM	#1
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	69-72 OEM Woodgrain Short bed moldings A very nice set of used OEM wood grain moldings for a short bed. I was told that they were in a body shop. They were covered with dust and overspray. I spent a couple of hours cleaning off the overspray and polishing them. They turned out real nice. The woodgrain on the passenger side piece in front of the wheel is a shade lighter. The Drivers side piece in front of the wheel has some flaws in the Woodgrain on the outer edges (see pictures). These would look super on a survivor type truck. The bright work only has slight oxidation in a few spots. Very straight. They are not bent anywhere and just a couple of small pencil point sized marks. No clips. Not perfect but very nice. $210 shipped and insured. Check or money order preferred. PayPal + Fees is okay. Thanks, Ray Attached Images __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White Last edited by 72 Super; 02-22-2022 at 07:34 PM. Reason: Price change

02-06-2022, 08:21 PM	#2
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: 69-72 OEM Woodgrain Short bed moldings more pictures Attached Images __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

02-06-2022, 08:29 PM	#3
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: 69-72 OEM Woodgrain Short bed moldings more pictures Attached Images __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

02-10-2022, 07:44 PM	#4
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: 69-72 OEM Woodgrain Short bed moldings I have spent a lot of time cleaning and polishing these moldings. They are really nice. $275 shipped Check or money order preferred. PayPal + fees okay as well. Thank you, Ray Attached Images __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

02-22-2022, 07:39 PM	#5
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: 69-72 OEM Woodgrain Short bed moldings I was advised that the passenger side molding in front of the wheel opening is more than likely a reproduction with the lighter shade Woodgrain. Lowered to $200 shipped. Check or money order preferred. PayPal +fees okay. Thanks, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White Last edited by 72 Super; 04-04-2022 at 08:17 PM.

04-04-2022, 08:18 PM	#6
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: 69-72 OEM Woodgrain Short bed moldings Lowered to $170 shipped. Thanks, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

04-14-2022, 10:25 PM	#7
blap Registered User Join Date: Nov 2008 Location: bristol,CT Posts: 580	Re: 69-72 OEM Woodgrain Short bed moldings PM sent

04-15-2022, 07:10 AM	#8
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: 69-72 OEM Woodgrain Short bed moldings Sold to blap. Thanks, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

04-15-2022, 09:43 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 69-72 OEM Woodgrain Short bed moldings If needed, I a selection of upper trim in my stash that may be suitable. I haven't put the elbow grease to them like Ray has to these __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-15-2022, 10:37 AM	#10
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: 69-72 OEM Woodgrain Short bed moldings What did you used to polish these?

04-16-2022, 01:30 PM	#12
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: 69-72 OEM Woodgrain Short bed moldings Thank you

05-05-2022, 06:15 AM	#14
blap Registered User Join Date: Nov 2008 Location: bristol,CT Posts: 580	Re: 69-72 OEM Woodgrain Short bed moldings Ray Moldings arrived ,excellent packaging and moldings are just as you described them. Thanks so much.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.