Engine tuning software - The 1947 - Present Chevrolet & GMC Truck Message Board Network

steves1967 · 05-07-2022, 12:48 PM

So I just got the 6.0LS up and running. I used the PSI Conversions harness and computer- now I want the ability to tune it myself as I change intakes and cam. What software should I use?

**Thealien** · 05-07-2022, 04:36 PM

The only 2 I know are EFI live and HP tuners. I believe the majority of the people use HP tuners. I believe there is the ability for additional tuning with EFI live.

Joyridin · 05-08-2022, 08:10 AM

I have HP Tuners. It works pretty good. I will say that it is much easier and probably less expensive to take it to a tuner and have it done. I have no idea what you plan to do, but once it is tuned, you really don't have a use for the software unless you are constantly going to be making engine changes. Depending on if the engine is a Gen 3 or Gen 4, there is also a pretty hefty learning curve. Gen 3 isn't bad, but Gen 4 computers started using a lot of algorithms to manipulate data instead of just plugging numbers into a table.

If you do buy a version of HP Tuners, you can usually find a used version with credits left. The new versions are getting criticized quite heavily as the EPA is taking its toll on the software and guys are finding out things have disappeared and/or not adjustable.

05-07-2022, 12:48 PM	#1
steves1967 Registered User Join Date: Dec 2001 Location: Manteca, Ca USA Posts: 305	Engine tuning software So I just got the 6.0LS up and running. I used the PSI Conversions harness and computer- now I want the ability to tune it myself as I change intakes and cam. What software should I use? __________________ '71 Chevy 3/4 Ton Longbed '22 Chevy Tahoe RST '67 Firebird- 8 sec street car '24 GMC CC 4x4 Duramax Dually

05-07-2022, 04:36 PM	#2
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: Engine tuning software The only 2 I know are EFI live and HP tuners. I believe the majority of the people use HP tuners. I believe there is the ability for additional tuning with EFI live. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

05-08-2022, 08:10 AM	#3
Joyridin Registered User Join Date: Sep 2020 Location: Cleveland, Ohio Posts: 553	Re: Engine tuning software I have HP Tuners. It works pretty good. I will say that it is much easier and probably less expensive to take it to a tuner and have it done. I have no idea what you plan to do, but once it is tuned, you really don't have a use for the software unless you are constantly going to be making engine changes. Depending on if the engine is a Gen 3 or Gen 4, there is also a pretty hefty learning curve. Gen 3 isn't bad, but Gen 4 computers started using a lot of algorithms to manipulate data instead of just plugging numbers into a table. If you do buy a version of HP Tuners, you can usually find a used version with credits left. The new versions are getting criticized quite heavily as the EPA is taking its toll on the software and guys are finding out things have disappeared and/or not adjustable.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.