Windshield under gasket seam

[Bomp]

Originally Posted by Jason Banks

3M 08509 https://www.3m.com/3M/en_US/p/d/b40067023/ Is what was recommended to help seal the windshield gasket to the cab where necessary. Could possibly be that

3M 08578 Strip Caulk - https://www.3m.com/3M/en_US/p/d/b40068361/ Is what I used to seal the hum to the floor. Not sure where I saw that recommendation. I think I'm also going to use it to seal the bed wheelhouses to the bedsides and floor.

If you are going for patina, I'd either try to find a seam sealer, to fill that gap on the top of the cab, in a semi matching color, either that our you can just seam seal it and try to touch up paint. I'll add, just because it's a patina build, doesn't mean you can't put new paint on some of these problem areas, leaving the 'patina' for the visible outside of the body.

Thank you for the info and advise. Very helpful. Thank you thank you thank you