Rubber A arm Bushings lube

[SCOTI]

Originally Posted by Old Doug

You brought up some good points. I grease the ball joints and sprayed silicon spray on the bushings and bounced the front end up and down .I took it for a drive and it drove better and the tires didnt make any noise. The left upper a arm dosent have any shims so there is a problem.

Not a problem if the desired specs were achieved during an alignment.

The Left vs. Right sides will usually have different shim stack quantities. It is weird not having any shims. But if it's working (you don't have to fight it driving down the road & it's not eating up tires) then you're probably fine.